Wiz145SR is a serial to ethernet converter module made by Wiznet , it is having multiple serial interface. It can connect up to 4 Serial ports. the module is built with W5300 chip.
Feature
Support 4 nos serial ports
Connect with the Serial Device directly
Adding ..
This board converts a USB connection into a 5 volt Serial TX and RX that you can connect straight to the Arduino Mini, Arduino Ethernet or other microcontrollers, allowing them to talk to the computer. It features an Atmega8U2 programmed as a USB-to-serial converter, the same chip found on the Ardui..
SparkFun Real Time Clock (RTC) Module, this little breakout that uses the DS1307 to keep track of the current year, month, day as well as the current time. The module comes fully assembled and pre-programmed with the current time (MST) and includes a small CR1225 Lithium coin cell battery that will ..
This is a TTL to USB convertor board which can be used to read data from RF Transceivers through the USB port of your PC. The driver IC in the board enables us to create a virtual COM port in the PC. It has the slot to insert different RF Transceivers like DRF1212D10, DRF7020D13, DRF7020D..
If you've ever tried to connect a 3.3V device to a 5V system or vice versa, you know what a challenge it can be. This 4 Channel logic level converter is a small module that safely steps down 5V signals to 3.3V and steps up 3.3V to 5V. This level converter also works with 2.8V an..
This is a basic (and cheaper) version of the adapter,with no battery! Easy to use and very reliable! This adapter is designed to be fitted on the new MediaTek MT3329 GPS 10Hz. It will make your life a lot easier! It is EM-406 port compatible, with a built-in power regulator. On the bottom side, the ..
This is a breakout board for Sparkfun's right-angle, 24-pin ATX connector.
Pair this board with the ATX connector and a standard PC power supply
and you'll have 3.3V, 5V, and ±12VDC to supply to your project. Make
sure you ground the PS_ON pin to enable all of the outputs.
All outputs of t..
The board comes pre-loaded with the SparkFun USB to Serial COM Port
firmware. When the board plugs into a USB port, Windows will ask for a
driver, point to the driver .inf file found here.
The board should now enumerate as a 'SparkFun COM Port' and act the
same as the SparkFun FTDI Basic. In..
RS422/RS485-to-Ethernet Module. WIZ108SR is the compact sized serial to Ethernet module using W7100A WIZnet iMCU, 8051. WIZ108SR is the protocol converter that transmits the data sent by serial equipment as TCP/IP data type, and converts back the TCP/IP data received through the network into serial ..
WIZ107SR is the compact sized serial to Ethernet module using W7100A, WIZnet iMCU, 8051. WIZ107SR is the protocol converter that transmits the data sent by serial equipment as TCP/IP data type, and converts back the TCP/IP data received through the network into serial data to transmit back to ..
WIZ105SR is the serial to Ethernet module using W5100 & 8051 MCU. WIZ105SR is the protocol converter that transmits the data sent by serial equipment as TCP/IP data type, and converts back the TCP/IP data received through the network into serial data to transmit back to the equipment.Featu..
WIZ100SR is the serial to Ethernet module using W5100 & 8051 MCU. WIZ100SR is the protocol converter that transmits the data sent by serial equipment as TCP/IP data type, and converts back the TCP/IP data received through the network into serial data to transmit back to the equipment.
F..
WIZ220IO is an embedded remote I/O module which is able to control and monitor I/O port remotely via Internet. It is possible to monitor and control I/O port by using Windows application program or the embedded Web server. There are 16 digital I/O ports and 4 analog I/O supported by WIZ220IO. Additi..
WIZ-Embedded WebServer provides the tiny web server operating on low-speed MCU. It controls digital output or monitors digital and analogue input through web browser. The webpage is stored in the serial flash memory of the board, and ..
WIZ812MJ is the network module that includes W5100 (TCP/IP, MAC & PHY) & MAG-JACK (RJ45 with X'FMR) with other glue logics. It can be used as a component and no effort is required to interface W5100 & MAG Jack. The WIZ812MJ is an ideal option for users who want to develop their Internet ..