MG90S Metal Gear Mini Servo is tiny and lightweight with high output power, this tiny servo is perfect for RC Airplane, Helicopter, Quadcopter or Robot. This servo has metal gear for added streangth and durabiliy. Servo can rotate approximately 180 degree(90 in each direction), and works just like t..
The 11kg.cm Metal Gear Servo Motor - MG996R is an advanced version of MG995 featuring faster response & greater torque. It can rotate approximately 120 degrees (60 in each direction). You can use any servo code, hardware or library to control these servos, so it's great for beginners ..
The 10kg.cm Metal Gear Servo Motor - MG995 can rotate approximately 120 degrees (60 in each direction). You can use any servo code, hardware or library to control these servos, so it's great for beginners who want to make stuff move without building a motor controller with feedback & ..
FS5106R is a 2BB continuous rotation motor from Feetech. The motor comes with plastic gear. It is an analog servo motor with operating voltage range 4.8-6V.
Specification:
Operating Speed:
0.18sec/60degree (4.8V)
0.16sec/60degree (14V)
Stall Torque:
5kg.cm/69.56oz.in(4.8V)
6kg.c..
FS5103R is a Continuous rotation servo motor with 2 Ball Bearing. The gear type is plastic. The cable length is 30cm. The servo is manufactured and supplied by Feetech. The torque offered is 3Kg.cm in 4.8V.
Specification:
Operating Speed:
0.18sec/60degree (4.8V)
0.16sec/60degree (13V)
..
FS5106M is a 2BB standard analog servo motor fro Feetech. The scope of rotation is 120 degrees. The operating speed ranges from 0.18sec/60degree to 0.16sec/60degree according to the voltage supplied.
Specification:
Operating Speed:
0.18sec/60degree (4.8V)
0.16sec/60degree (8V)
Stall T..
FS5103B is a 2BB analog motor with torque 3.2Kg.cm.It is a servo motor with plastic gear. The scope of rotation is 120 degrees. The speed of rotation is 0.18sec/60degree at 4.8V and 0.16sec/60degree at 6V.
Specification:
Operating Speed:
0.18sec/60degree (4.8V)
0.16sec/60degree (6V)
S..
This Micro Motor is a continuous rotation motor with torque 1.3Kgcm. The motor is an analog motor with plastic gear. The operating voltage ranges from 4.8V to 6V.
Specification:
Operating Speed:
0.12sec/60degree (4.8V)
0.10sec/60degree (6V)
Stall Torque:
1.3kg.cm/18.09oz.in(4.8V)
..
The motor is a 1.3 Kg micro analog servo motor with plastic gear. The motor is light weighted and the operating voltage is 4.8V to 6V. The rotation scope of the motor is 120°. The motor is mainly used in robotics applications.
Specification:
Operating Speed:
0.12sec/60° (4.8V)
0.10sec/60° ..
Standard analog continues rotation servo with metal gears. The operating voltage range is 4.8-6Volts with a stall torque of 14kg.cm at 6V. The Wire length is 30cm
Specification:
Operating Speed :
0.18sec/60degree (4.8V)
0.16sec/60degree (6V)
Stall Torque :
12.5kg.cm/173.9oz.in(4.8..
The motor is a 1.8 kg.cm micro analog servo motor with metal gear. The motor is light weighted and the operating voltage is 4.8V to 6V. The rotation scope of the motor is 120°. The motor is mainly used in robotics applications.
Specification:
Operating Speed :
0.12sec/60degree (4.8V)
0.10s..
SM-S2309S micro Servo 1.1 kg.cm can be used for your project development. This comes with a standard 3 pin power, control cable and all the accessories as shown in the image. Can be used in Electric aircraft, glider etc.
Specifications:
Model: SM-S2309S
Size: 22.9x12.3x22.2mm / 0.9x0.49x0.87in..
Description: SG5010 is a high quality but really low-cost servo for all your mechatronic needs. It comes with a 3-pin power and control cable, even a dozen of hardware as shown in the image.
Specifications:
Model: SG-5010
3 pole ferrite, all nylon gear
Top ball bearing
Operatin..
Description: SG90 is a high quality, low-cost servo for all your mechatronic needs. It comes with a 3-pin power, control cable and mounting hardware.
Specifications:
3 pole ferrite, all nylon gear
Top ball bearing
Operating Voltage: 4.8V~6.0V
Operating speed: 0.12sec/60 degree
..