The Arduino Ethernet Shield allows an Arduino board to connect to the internet using WIZnet W5100 Ethernet chip. This Shield with Micro SD Card Slot supports up to four simultaneous socket connections. It provides a network (IP) stack that supports both TCP and UDP protocols.
The Ethe..
USB Host Shield is an inexpensive development board designed to be used in embedded applications which require USB Host functionality. The Arduino USB Host Shield is based on the MAX3421E. This is a USB peripheral/host controller containing the digital logic and analog circuitry necessary to impleme..
This shield Motor is based on the L298P, can be used to drive 2 DC motor or one 4-wire stepper and one 5v servos. The shield drives motors with digital pins D10, D11, D12, D13, and servo with digital pin D9. The Shield Motor is a full bridge double designed to drive inductive loads such a..
3.2Inch Tft Touch Shield For Arduino is a resistive touch screen TFT LCD,320x240 resolution, integrate controller on board. It uses SPI interface, can be used to display image, text or draw geometric figure with functions.Its a standard Arduino interface and also compatible with development boards l..
3.5Inch TFT Touch Shield is a 3.5inch resistive screen module with a resolution 480x320. It has an internal controller allowing to draw on the display geometric figures, text and pictures by using correspondent functions available via SPI communication interface.
Features of 3.5Inch TFT Touch Shi..
Arduino Dock R2 allows to supercharge the projects by combining the familiar Arduino platform with the power and connectivity of the Omega2. Each dock features the ATmega328P microcontroller as a coprocessor to act in tandem with the Omega, and exposes the GPIO pins of both the Omega and the microco..
In the Arduino Protoshield - PCB, the ProtoShield mates with the Arduino USB board and gives the user a small soldering area, two general LEDs, access to a BlueSMiRF socket, a general pushbutton switch, and most important of all - the Arduino reset switch is brought to the top level.
Features OF..
The Arduino Screw Shield V2 is a terminal expansion board that allows you to screw in jumper wires to a screw terminal for a much stronger and secure connection for your I/O and power pins. Feel secure with this arduino-compatible screw shield. The user can also overlay on top of other expansion boa..
RS485 CAN Shield from Waveshare is originally designed for NUCLEO/XNUCLEO Boards and all other Arduino compatible boards. This Shield will easily enable RS485 and CAN communication functions for your Arduino boards. Shield houses MAX3485 for the RS485 functionality and SN65HVD230 for CAN functionali..
An all-in-one arduino compatible shield from rhydoLABZ, that lets you add location-tracking, voice, text, data connectivity, bluetooth and data storage to your project in an adorable little package.The shield features new generation GlobalTop GPS chipset and SIM800 Quad-band GSM/GPRS engine tha..
An all-in-one arduino compatible shield from rhydoLABZ, that lets you add location-tracking, voice, text and data connectivity and data storage to your project in an adorable little package. The shield features new generation GlobalTop GPS chipset and SIM900A Dual-band GSM/GPRS engine that work..
An all-in-one arduino compatible shield from rhydoLABZ, that lets you add location-tracking, voice, text, data connectivity and data storage to your project in an adorable little package.The shield features new generation GlobalTop GPS chipset and SIM900 Quad-band GSM/GPRS engine that works on ..
Introducing rhydoLABZ GSM/GPRS Shield, an all-in-one SIM900A shield that lets you add voice, text/SMS and data to your arduino project in an easy to use pluggable arduino formfactor. It is built with a stamp sized Dual Band GSM/GPRS engine - SIM900A, works on frequencies 900/ 1800 MHz. This sh..
Introducing rhydoLABZ GSM/GPRS Shield, an all-in-one SIM800 shield that lets you add voice, text/SMS, data connectivity and Bluetooth to your arduino project in an easy to use manner. With right program running, you could just plug and play as it has got an arduino form-factor. It is built with a st..
Introducing rhydoLABZ GSM/GPRS Shield, an all-in-one SIM900 shield that lets you add voice, text/SMS and data to your arduino project in an easy to use pluggable arduino formfactor. It is built with a stamp sized Quad Band GSM/GPRS engine - SIM900, works on frequencies 850/ 900/ 1800/ 1900 MHz..