The NES-35-15 is a 35W single-output enclosed type Switching Power Supply. Adopting the input of 85VAC -264VAC(selectable by switch), it provides an output voltage line of 15V.
Features :
Input Voltage : 85 VAC to 264 VAC, 120 VDC to..
B0505S-2WR3 5V To 5V 2W 400mA is a DC To DC Isolation Voltage Power Module Converter. It has Constant voltage input, isolated non stabilized voltage single output, 2 watts power and 400mA output current. This DC to DC Power Module Converter has a transfer efficiency up to 90% and..
Description: HLK-2M05 Hi-link 5V 2W AC to DC Power Supply Module is plastic enclosed PCB mounted isolated switching step-down power supply module. It can supply 5V DC from 120V AC – 230V AC and has a power rating of 2W. This power supply module replaces lots of parts from the traditional power suppl..
Overview
BabyBuck Regulator Breakout - SparkFun to help us with just such a task. Featuring the AP63203 from Diodes Inc, this breakout board takes advantage of a 2A synchronous buck converter that has a wide input voltage range of 3.8V to 32V and fully integrated 125mΩ high-side power MOSFET/68mâ..
Overview
12V/20W SMPS (HLK-20M12) Module (Hi-Link) is a small volume, plastic enclosed PCB mounted, isolated switching step-down high-efficiency power module, designed by Hi-Link. It has been widely used in smart homes, automation control and other industries.
It can supply 12V DC from 100 ~ 240V..
Overview
5V/10W SMPS (HLK-10M05) Module (Hi-Link) is a small volume, plastic enclosed PCB mounted, isolated switching step-down high-efficiency power module, designed by Hi-Link. It has been widely used in smart homes, automation control and other industries.
It can supply 5V DC from 100 ~ 240V ..
Overview
5V /20W SMPS (HLK-20M05) Module is a small volume, plastic enclosed PCB mounted, isolated switching step-down high-efficiency power module, designed by Hi-Link. It has been widely used in smart homes, automation control and other industries.
It can supply 5V DC from 100 ~ 240V AC and has..
Overview
The 12V /10W SMPS (HLK-10M12) Module, ultra-small series power supply module is a small volume, high efficiency power module designed for customers by Hi-Link. It has the advantage of global input voltage range, low temperature rise, low power consumption, high efficiency, high reliabili..
This board is a charge pump voltage inverter that converts an input voltage between 1.8 V and 5.3 V to a corresponding negative output voltage, with a typical efficiency of over 80%. The inverter can deliver a continuous output current of 60 mA across most of its operating range, making it a simple ..
1W DC / DC series products provide small size, high efficiency, tiny power, constant voltage, input isolation and unregulated, single output module power supply; this series of products is specially designed to generate a group of input power isolation in the power supply system Designed for voltage..
The shunt regulator can protect power supplies from voltage spikes generated by motor controllers they are connected.This version has a fixed set point of 33.0 V, a shunt resistance of 4.10 ohms, and a total of 32 SMT shunt resistors populated on both sides of the PCB (this is the higher-power versi..
The shunt regulator can protect power supplies from voltage spikes generated by motor controllers they are connected to. This version has a fixed set point of 33.0 V, a shunt resistance of 4.00 ohms, and twelve SMT shunt resistors populated on one side of the PCB (this is the lower-power version). A..
3.3V/3W smps Module (Hi-Link) is PCB mounted plastic enclosed isolated switching step-down power supply module. It can supply 3.3V DC from 100V AC - 240V AC and power rating of 3 watt. There are many advantages for these modules, such as low temperature rise, low power, high efficiency, high reliabi..
B0505S-1WR3 is a Isolated 5V Dc-Dc converter and are specially designed for applications where an isolated voltage is required in a distributed power supply system. They are suitable for pure digital circuits, low frequency analog circuits, relay-driven circuits and data switching circuits.
Featu..
IRM series is AC/DC single output encapsulated type power supply with built-in short circuit, overload, over voltage protections. IRM series encapsulated medical power supply cooling by free air convection. This series encapsulated medical power supply universal AC input/ Full range; moreover, no lo..