New
Model: BAT-3226
Cellmeter-7 Digital Battery Capacity Checker is a simple and fast way to check battery voltage and condition of various type of battery within second. This capacitive tester will easily monitor battery cell voltages, total voltages, lowest cell voltage, highest cell voltage, gap between the highest ..
Rs 324.00
Out Of Stock
Model: BAT-3298
Brand: Chineese
Polymer Lithium Ion Battery is a very slim, extremely light weight batteries based on the new Polymer Lithium Ion chemistry. This is the highest energy density currently in production. Each cell outputs a nominal 3.7V at 1000mAh. These batteries require special charging. Do not attempt to charge the..
Rs 399.00
Stock Clearance Sale
-37 %
Model: WID-3319
Brand: Sparkfun - USA
SparkFun LiPo Charger/Booster - 5V/1A is a no-nonsense circuit for generating one amp from a Lithium Polymer battery at 5V. This LiPo charger is a very economical choice that is equipped with a simple booster circuit utilizing the PAM2401 IC, and includes protection diodes so you can run multiple ce..
Rs 949.00 Rs 1,499.00
Stock Clearance Sale
-94 %
Out Of Stock
Model: WID-3332
Brand: Sparkfun - USA
SparkFun LiPo Charger Basic - Micro-USB is used to charge charge LiPo batteries. The SparkFun LiPo Charger charge 3.7V LiPo cells at a rate of 500mA. It is designed to charge single-cell Li-Ion or Li-Polymer batteries. The board incorporates a charging circuit, status LED, connector for your battery..
Rs 49.00 Rs 799.00
Out Of Stock
Model: BAT-3180
Brand: Chineese
Lipo Battery 4200mAh/11.1V has three cells and outputs 11.1V storing 4200mAh of charge.This is a good Li-po battery for projects like small robotics and radio-controlled projects. It has high discharge rates and big capacity and can be used in RC airplane, RC helicopter, RC car, RC truck, RC boat, ..
Rs 2,999.00
Out Of Stock
Model: BAT-3179
Brand: Chineese
Lipo Battery 3000mAh / 11.1V has three cells and outputs 11.1V storing 3000mAh of charge.This is a good Li-po battery for projects like small robotics and radio-controlled projects. It has high discharge rates and big capacity and can be used in RC airplane, RC helicopter, RC car, RC truck, RC boat..
Rs 2,499.00
Out Of Stock
Model: BAT-3178
Brand: Chineese
Lipo Battery 2200mAh / 11.1V has three cells and outputs 11.1V storing 2200mAh of charge.This is a good Li-po battery for projects like small robotics and radio-controlled projects. It has high discharge rates and big capacity and can be used in RC airplane, RC helicopter, RC car, RC truck, RC boat..
Rs 1,599.00
-80 %
Model: LIL-3124
Brand: Sparkfun - USA
The Lilypad simple power is simple e-textile board which allows to connect and charge a lipo battery and switch it on or off. Using this LilyPad simple power it is very easy to add power to wearable circuit. Lilypad is a wearable e-textile technology each Lilypad was creatively designed to have larg..
Rs 149.00 Rs 749.00
Model: LIL-3122
Brand: Sparkfun - USA
Lilypad Coin Cell Battery Holder - 20mm board holds a 20mm coin cell battery (such as a CR2032) and gives 4 connection points (two positive and two negative).
Package includes:
1 X Lilypad Coin Cell Battery Holder - 20mm
Resources:
Schematic
Eagle files
GitH..
Rs 339.00
Out Of Stock
Model: ROB-2812
Description: The 8 x AA Battery Holder with Switch puts a nice finishing touch on your battery powered project. This holder features a removable sliding cover which is secured with a small phillips head screw. Another bonus is the ON/OFF switch which can be used to control the power input to your pr..
Rs 270.00
Out Of Stock
Model: ROB-2792
The 3 x AAA Battery Holder with Switch puts a nice finishing touch on your battery powered project. This holder features a removable sliding cover which is secured with a small phillips head screw. Another bonus is the ON/OFF switch which can be used to control power to your project. The leads are a..
Rs 123.00
Out Of Stock
Model: ROB-2790
The 4 x AA Battery Holder with Switch puts a nice finishing touch on your battery powered project. This holder features a removable sliding cover which is secured with a small phillips head screw. Another bonus is the ON/OFF switch which can be used to control power to your project. The leads are ab..
Rs 79.00
Out Of Stock
Model: ROB-2642
The 4 x AAA Battery Holder with Switch puts a nice finishing touch on your battery powered project. This holder features a removable sliding cover which is secured with a small phillips head screw. Another bonus is the ON/OFF switch which can be used to control power to your project. The leads are a..
Rs 148.00
Stock Clearance Sale
-68 %
Model: WID-2599
Brand: Sparkfun - USA
The PowerCell board is a single cell LiPo boost converter (to 3.3V and 5V) and micro-USB charger in one. The board comes with a JST connector for a single cell LiPo battery, a micro-USB connector for the 5V charge input, and selectable 3.3V and 5V output pins (labeled ‘out’). There are also two char..
Rs 499.00 Rs 1,578.00
Out Of Stock
Model: CON-2513
Description: This simple cable has so many uses! Plug the battery clip onto a standard 9V battery and connect the other end to any device that needs 9V. The Connector leads are polarity color coded, Red and Black.
Features:
Insulates and shields 9 Volt battery snap-on connector ..
Rs 10.00