Model: SEN-3765
Brand: Waveshare
Overview
UART Fingerprint Sensor (D)
Capacitive 360° Verification
Nail plate-sized, UART commands operation
Features:
Based on a high performance Cortex processor, combined with high-security commercial fingerprinting algorithm, the UART Fingerprint Sensor (..
Rs 2,399.00
Out Of Stock
Model: MIS-3251
Brand: Waveshare
It’s an 8Ω 5W Speaker.
Specifications:
Impedance: 8Ω
Power: 5W
Dimension: 100mm x 45mm x 21 mm
For use with:
5inch HDMI LCD (G)
5inch HDMI LCD (H)
7inch HDMI LCD (H)
10.1inch HDMI LCD (H)
Package Includes:
1x 8Ω 5W Speaker..
Rs 449.00
Model: SEN-3756
This a high sensitivity vibration sensor mainly used for security detecting. This module features high sensitivity, fast response and excellent performance, and it is widely used to for security applications such as anti-theft system for vehicle.The sensor will output a low logic voltage when vibrat..
Rs 277.00
Out Of Stock
Model: SEN-3722
Brand: Waveshare
This is a small 1D/2D codes reader, by using the intelligent image recognition algorithm, it will decode the barcode or 2D code on paper or screen, fast and accurately.
Through the onboard USB and UART interface, it can be directly plugged into a computer, or be easily integrated to kinds of devi..
Rs 2,999.00
Model: WID-2508
Brand: Chineese
WTV-SR is one of the member of recording serial products. This module can record as well as fixed voice playback, recording content uploaded and a variety of control modes can be chosen. With the master chip and plug-in SPI-FLASH, it has a great advantage in the duration time of recording and cost p..
Rs 399.00
Stock Clearance Sale
-56 %
Model: INT-3695
Brand: Sparkfun - USA
The SPI Buffer Saver is a hardware solution to an interesting problem. In short the standard Arduino SPI library includes a method to transfer out an array (or buffer) but the contents are replaced by whatever data is on the MOSI line at that time. This is problematic when using the SPI hardware to ..
Rs 199.00 Rs 449.00
Out Of Stock
Model: PRT-3302
Brand: Sparkfun - USA
The SparkFun TSH82 Configurable OpAmp Board was designed to give the best combination of performance and flexibility that could be achieved by giving two gain stages, each one independently accessible on the header pins. Each stage is natively configured as an inverting amplifier that can also be st..
Rs 399.00
Model: WID-3702
Description : R307 fingerprint module is a finger print sensor with TTL UART interface. The user can store the fingerprint data in the module and can configure it in 1:1 or 1: N mode for identifying the person. The FP module can directly interface with 3.3 or 5v Microcontroller. A level converter (l..
Rs 1,199.00
Model: WID-2588
Brand: Sparkfun - USA
Sunny Buddy is a maximum power point tracking (MPPT) solar charger for single-cell LiPo batteries. This MPPT solar charger provide you with the ability to get the most possible power out of your solar panel or other photovoltaic device and into a rechargable LiPo battery. Set-up is easy as well, jus..
Rs 2,599.00
Model: WID-3379
Brand: Waveshare
Capacitive Fingerprint Reader (UART/USB) is a standard fingerprinting module designed for secondary development, allows fast and stable fingerprint verification. Based on a high-speed digital processor STM32F105R8, combined with high-security commercial fingerprinting algorithm, and advanced semicon..
Rs 3,399.00
Hot
Model: WID-2702
Brand: Chineese
The Vibration Sensor Module Vibration Switch SW-420 is based on the vibration sensor SW-420 and Comparator LM393 to detect if there is any vibration that beyond the threshold. The threshold can be adjusted by the on-board potentiometer. When this no vibration, this module output logic LOW the signa..
Rs 79.00
Model: ARD-2809
Mini MP3 Player Module or otherwise called the DFPlayer, with simplified output, is a compact, low cost MP3 module which can be directly connected to the speaker. The Mini MP3 Player Module can be used as a stand alone module with attached battery, speaker and push buttons. Or you could interface it..
Rs 169.00
Stock Clearance Sale
-37 %
Model: LIL-2489
Brand: Sparkfun - USA
Lipower - Boost Converter board is based on the incredibly versatile TPS61200 boost converter. The board is configured to be used with a LiPo battery, has solder jumper selectable 5V and 3.3V output, and an under voltage protection of 2.6V. However, the board can also be used as a general purpose bu..
Rs 749.00 Rs 1,189.00
Out Of Stock
Model: ROB-2637
Brand: Pololu - USA
Pololu 5V Step-Up Voltage Regulator U1V11F5 generates higher output voltages from input voltages as low as 0.5 V, and it also automatically switches to a linear down-regulation mode when the input voltage exceeds the output. This makes it great for powering 5 V electronics projects from 1 to 3 NiMH..
Rs 399.00
Out Of Stock
Model: ROB-2636
Brand: Pololu - USA
Pololu 5V Step-Up Voltage Regulator U1V10F5 generates higher output voltages from input voltages as low as 0.5 V, and it also automatically switches to a linear down-regulation mode when the input voltage exceeds the output. This makes it great for powering 5 V electronics projects from 1 to 3 NiMH,..
Rs 699.00