Menu
Your Cart

Interfacing Modules

Model: INT-2255 Brand: Sparkfun - USA
Introducing the 3.3V SparkFun FT231X Breakout board, complete with the full UART hardware handshake feature! The pinout of this board matches the FTDI cable to work with official Arduino and cloned 3.3V Arduino boards. It can also be used for general serial applications. This board still bri..
Rs 989.00
Model: INT-2186 Brand: iTead Studio
It's a small USB to TTL serial tool, using the PL2303 chip. You can use it to connect some serial device to your PC via USB port. Features:  Simple serial communication. Operation Level-Digital 5V Power Supply-External 5V Router or ADSL firmware upgrade. GPS serial communicatio..
Rs 249.00
Model: INT-2184 Brand: 4D Systems
The 4D Programming Cable is a USB to Serial-TTL UART converter cable. It incorporates the Silabs CP2102 USB to Serial UART bridge IC (as used in the uUSB-MB5 module) which handles all the USB signaling and protocols. The cable provides a fast and simple way to connect all of the 4D devices that requ..
Rs 2,499.00
Model: INT-2071 Brand: Wiznet
The W7200 is a new single chip microcontroller which integrates an ARM 32bit Cortex M3 with a hardwired TCP/IP core for high performance, easy development, and instant-on, reliable Ethernet capabilities. The W7200 incorporates 10BaseT/100BaseTX Ethernet PHY (physical layer), supporting half-duplex/f..
Rs 661.00
Model: INT-2045 Brand: Wiznet
The W5200 chip is a Hardwired TCP/IP embedded Ethernet controller that enables easier Internet connection for embedded systems.W5200 suits users in need of stable Internet connectivity best, using a single chip to implement TCP/IP Stack, 10/100 Ethernet MAC and PHY. Hardwired TCP/IP stack supports ..
Rs 440.00
Model: INT-2042 Brand: Wiznet
WIZ820IO is a plug-in internet-offload network module that includes WIZnet’s popular W5200 (TCP/IP hardwired chip + PHY), a mag-jack (RJ45 with transformer) and other peripheral logic. Housed in a very small form factor (23mm x 25mm) with two rows of 0.1”-spaced pins, WIZ820IO can be used as a ready..
Rs 1,899.00
Model: INT-2037 Brand: Wiznet
WIZ120SR is an embedded module based on WIZnet W5100 & ARM Cortex-M3. WIZ120SR is the protocol converter that transmits the data sent by serial equipment as TCP/IP data type, and converts back the TCP/IP data received through the network into serial data to transmit back to the equipment. It sup..
Rs 3,090.00
Model: INT-2036 Brand: Wiznet
The WIZ110SR is a gateway module that converts RS-232 protocol into TCP/IP. It enables remote gouging, managing and control of TCP/IP devices through an RS-232 serial interface. In other words, WIZ110SR is a protocol converter that transmits the data sent by serial equipment as TCP/IP data type and ..
Rs 2,499.00
Model: INT-2024 Brand: rhydoLABZ
This is a basic breakout board made by rhydoLABZ for the FTDI FT232RL USB to serial IC , based on the well famous FTDI-Basic board from Sparkfun and all credits goes to them. The pinout of this board matches the FTDI cable to work with official Arduino and cloned Arduino boards!!. The boar..
Rs 662.00
Model: INT-2023 Brand: rhydoLABZ
This is a basic breakout board made by rhydoLABZ for the FTDI FT232RL USB to serial IC , based on the well famous FTDI-Basic board from Sparkfun and all credits goes to them.The pinout of this board matches the FTDI cable to work with official Arduino and cloned Arduino boards!!. The board..
Rs 662.00
Model: INT-2020 Brand: rhydoLABZ
This is rhydoLABZ make XBee Explorer board with USB A Type connector for the XBee line of products which can be used as Dongle - can avoid USB cable and LAPTOP friendly!!. The board is populated with high current LDO to support most of XBee modules including XBee Pro!. The X..
Rs 815.00
Model: INT-2019 Brand: rhydoLABZ
This is the newest revision ( Rev B) of rhydoLABZ make XBee Explorer board for the XBee line of products . The new board is populated with high current LDO to support most of  XBee modules including XBee Pro! . This new board is also populated with a Reset Switch, which help you to downloa..
Rs 854.00
Model: INT-2018 Brand: rhydoLABZ
This is the newest revision of rhydoLABZ make  USB to RS 485 Converter board (INT-1201) .It is very compact and ready to use circuitry which performs the  USB (Universal Serial Bus) to two wire RS485 (2 Wire Half Duplex) and vice versa conversion. The board holds an FT232RL USB UART I..
Rs 843.00
Model: INT-2017 Brand: rhydoLABZ
This is newest revision of rhydoLABZ make USB to Serial Converter (FT232RL Breakout) board. It is a compact and ready to use board which performs USB to Serial TTL (5V and 3V3) and vice versa conversion. The board holds an FT232RL USB UART IC for  conversion. This module process an ea..
Rs 661.00
Model: INT-1975
The RTL8019AS is a Full-Duplex Ethernet Controller with Plug and Play Function. It integrates the RTL8019A and 16K-byte SRAM in a single chip. It is designed not only to provide more friendly functions but also to save the effort of SRAM source and inventory. Most of the design spec. inher..
Rs 308.00
Showing 46 to 60 of 91 (7 Pages)