Esp-12E Esp8266 Wifi Module is a low power consumption of the UART-Wifi module and ultra low power consumption technology, designed especially for mobile devices and IoT applications,user's physical device can be connected to a Wifi wireless network, internet or intranet communication and networking..
ESP32 is a highly-integrated solution for Wi-Fi and Bluetooth IoT application. It is a Xtensa 32-bit LX6 microprocessor(s) upto 240 MHZ clock frequency.It implements TCP/IP and full 802.11 b/g/n WLAN MAC protocol.It integrates a Bluetooth link controller and Bluetooth baseband, which carry out the b..
The Realtek Ameba Board from Realtek, an IoT solution inside the familiar Arduino form factor. The Ameba Board supports WiFi, GPIO, NFC, I2C, UART, SPI, PWM and ADC operations, and can support Ethernet via Arduino-compatible headers. Ameba Board’s multiple interface options will be able to connect w..
SparkFun ESP32 Thing Power Control Shield, enables the ESP32 Thing to switch up to 5A of a DC load. With a default voltage range of 5–28V DC, power can be connected to this shield in one of two ways. The first is the barrel connector, but with a maximum current rating of 2.5A (designed for light loa..
This is the SparkFun ESP8266 Thing Dev Board — a development board that has been solely designed around the ESP8266, with an integrated FTDI USB-to-Serial chip. The ESP8266 is a cost-effective and very capable WiFi-enabled microcontroller. Like any microcontroller, it can be programmed to blink LEDs..
Blynk itself is an application which lets you create an app to control Arduino, Raspberry Pi and the likes over the Internet. Supported on both iOS and Android, Blynk will get you online and ready for the Internet Of Your Things. With Blynk's digital dashboard, building an application is so easy. Yo..
ESP8266 ESP-01E Remote Serial WiFi Transceiver is just like ESP-01. Well, an upgraded version we could say. Like its predecessor, ESP-01E can communicate with AT commands, or be flashed with Lua or even be used with an Arduino. However, the flash memory size has been doubled from 512 KB to 1 MB.
..
Nl6621-Y1 2.4G UART Serial to WiFi Module for Arduino bridges between serial UART and WiFi. It is based on NL6621M, a highly integrated SOC. It has a 3V3 TTL serial communication interface and its parameters can be set by AT command.
NL6621M integrates MCU, MAC, 1T1R baseband and RF transceiver w..
Description: ESP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor. ESP8266 has..
Description: Take advantage of the Raspberry Pi and Beagle Bone's USB port to add a low cost, but high-reliability wireless link. This WiFi dongle is supported by the Bone's Angstrom/Debian installation that comes with each Bone as well as Raspbian and just about any other modern Pi operating system..
Description: The SparkFun ESP8266 Thing is a breakout and development board for the ESP8266 WiFi SoC – a leading platform for Internet of Things (IoT) or WiFi-related projects. The Thing is low-cost and easy to use, and Arduino IDE integration can be achieved in just a few steps. We’ve made the..
ESP8266 Serial WIFI Module (ESP-07) is a new player in this field: it’s tiny (25mm x 15mm), with simple pin connections, using serial TX/RX to send and receive Ethernet buffers, and similarly, using serial commands toquery and change configurations of the WiFi module. This is quite convenient as it ..
ESP8266 Serial WiFi Module (ESP-05) is a new player in this field: it’s tiny (25mm x 15mm), with simple pin connections (standard 2×4 pin headers), using serial TX/RX to send and receive Ethernet buffers, and similarly, using serial commands toquery and change configurations of the WiFi module. This..
ESP8266 ESP-01 Remote Serial Port WIFI Transceiver is the new trend in WiFi IoT devices. Its low-cost and easy-to-use features which makes this module so popular. ESP-01 is tiny (25mm x 15mm) – fits in compact space and it has with simple pin connections (standard 2×4 pin headers).
One can commun..
Description: We are pleased to bring you the Mackerel WiFi development board from ACKme! The AMW004-E03 Mackerel dev board provides you with a quick and easy way to develop and experiment with Wi-Fi networking. This board is perfect for embedded applications requiring medium/high data throughput in ..