Model: LIL-3126
Brand: Sparkfun - USA
A LilyPad Micro is like a smaller version of the LilyPad LED board. By eliminating the resistor and changing the orientation of the surface mount LED we've shrunk the board down which looks great in elegant designs or on sheer fabrics where you don't need the extra weight or exposed board space. It'..
Rs 335.00
Model: LIL-3125
Brand: Sparkfun - USA
The LilyPad Light Sensor is a sewable breakout board with an ALS-PT19 light sensor built in and ready to use right away. Each sensor outputs voltage between 0V and 3.3V depending on the level of ambient light shining on it. As more light is applied on the sensor, more current will flow from the boar..
Rs 399.00
Model: ARD-2570
Brand: Lilypad
The LilyPad Arduino USB is a microcontroller board based on the ATmega32u4. It has 9 digital input/output pins (of which 4 can be used as PWM outputs and 4 as analog inputs), an 8 MHz resonator, a micro USB connection, a JST connector for a 3.7V LiPo battery, and a reset button. It contains ev..
Rs 1,899.00
Model: LIL-2256
Brand: Sparkfun - USA
The LilyPad MP3 Player is your all-in-one audio solution, containing an Arduino-compatible microcontroller, MP3 (and many other formats) audio decoder chip, micro-SD card socket, and a stereo audio amplifier. Part of the Lilypad E-textiles line, this board can be used to give your fabric creations t..
Rs 3,282.00
Model: LIL-1878
Brand: Sparkfun - USA
A small, but mighty power supply. This board was designed to be as small and inconspicuous as possible. Pop in a AAA battery, flip the power switch, and you will have a 5V supply to power your LilyPad network. Good up to 100mA. Short circuit protected.This board has AAA battery clips but can use an ..
Rs 999.00
Model: LIL-1629
Brand: Sparkfun - USA
This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 5V Arduino boards. It can also be used for general serial applications. The major difference with this board is that it brings out the DTR pi..
Rs 1,099.00
Out Of Stock
Model: LIL-1627
Brand: Sparkfun - USA
The LilyPad Battery Connect simply gives you a connection point for a battery or anything else you might want to plug in to your LilyPad system. It consists of a single 2-pin JST connector on a small LilyPad board with positive and negative terminals.
LilyPad is a wearable e-textile technology deve..
Rs 164.00
Model: LIL-1624
Brand: Sparkfun - USA
Blink any color you need! Use the Tri-Color LED board as a simple indicator, or by pulsing the red, green, and blue channels, you can create any color. Very bright output. This is a common anode design - to turn on a channel you simply need to ground one of the R/G/B pins to illuminate that channel...
Rs 499.00
Model: LIL-1610
Brand: Sparkfun - USA
The LilyPad XBee is a breakout board for the popular XBee modules that can be sewn into your e-textile projects to provide them with a little “connectivity.” This board includes easy-to-sew tabs and all the necessary power regulation to run on the LilyPad system. Once sewn into your project just att..
Rs 999.00
Model: LIL-1503
Brand: Sparkfun - USA
Here is a simple 5 pack of yellow LEDs for LilyPad, or whatever else you can dream up. Light up the night!
LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to all..
Rs 335.00
Model: LIL-1502
Brand: Sparkfun - USA
Here is a simple 5 pack of green LEDs for LilyPad, or whatever else you can dream up. Light up the night!
LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to al..
Rs 335.00
Model: LIL-1501
Brand: Sparkfun - USA
Here is a simple 5 pack of blue LEDs for LilyPad, or whatever else you can dream up. Light up the night!
LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to all..
Rs 335.00
Model: LIL-1370
Brand: Sparkfun - USA
This is a small buzzer for the LilyPad system. Use 2 I/O pins on the LilyPad main board and create different noises based on the different frequency of I/O toggling. Loud enough to hear inside a pocket but not obtrusively loud.
This is an inductive buzzer meaning that is will act as a short to gr..
Rs 449.00
Model: LIL-1368
Brand: Sparkfun - USA
Sparkfun designed this board to give the user a low profile button without any sharp edges. Button closes when you push it and opens when you release (momentary push button).
LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Eac..
Rs 89.00
Model: LIL-1366
Brand: Sparkfun - USA
This is a large board for prototyping through hole components with the LilyPad system. There are an array of pins all shorted together with 10mil traces. This allows for quick and easy prototyping - all you have to do is cut the traces between holes you don’t want connected! Standard 0.1" array. Che..
Rs 599.00