Embedded C Teach Yourself Kit - rhydoLABZ
- Stock: In Stock
- Brand: rhydoLABZ
- Model: TYS-1135
- Weight: 1.60kg
- MPN: TYS-1135
Rs 3,999.00
(Excluding GST)
Description: The Embedded C Kit is a Teach yourself Kit based on Microchip's PIC16F877A microcontroller with Embedded C programming Language, suitable for teaching and learning embedded system programming in High level Language. This tutorial is intended to give a detailed picture of Installing and Configuring IDE ,Compilers and C programming, based on the Microchip's PIC16F Series microcontroller. The tutorial kit includes all necessary Example codes and Development tools to assist you in developing various applications.
The PIC16F877A CMOS FLASH-based 8-bit microcontroller is upward compatible with the PIC16C5x, PIC12Cxxx and PIC16C7x devices. It features 200 ns instruction execution, 256 bytes of EEPROM data memory, self programming, 8 channels of 10-bit Analog-to-Digital (A/D) converter, Capture/compare/PWM functions, a synchronous serial port that can be configured as either 3-wire SPI or 2-wire I2C bus, a USART, and a Parallel Slave Port.
Note: The USB connector, provided on board, is only for powering.
eCee PIC16F877A Features:
The PIC16F877A CMOS FLASH-based 8-bit microcontroller is upward compatible with the PIC16C5x, PIC12Cxxx and PIC16C7x devices. It features 200 ns instruction execution, 256 bytes of EEPROM data memory, self programming, 8 channels of 10-bit Analog-to-Digital (A/D) converter, Capture/compare/PWM functions, a synchronous serial port that can be configured as either 3-wire SPI or 2-wire I2C bus, a USART, and a Parallel Slave Port.
Note: The USB connector, provided on board, is only for powering.
eCee PIC16F877A Features:
- Compact and Ready to use design
- Professional EMI/RFI Complaint PCB Layout Design for Noise Reduction
- High Quality Two layer PTH PCB
- Includes PIC16F877A Microcontroller
- Board Supports PIC 18F4580/4520/4550* Microcontrollers
- No separate programmer required (Built in Boot loader)
- No Separate power adapter required (USB power source)
- Screw terminal for External power Supply (with Jumper Select Option)
- External Power Supply range of 7V to 20V
- Adaptor (any standard 9-12V power supply) option
- RS-232 Interface (For direct connection to PC’s serial port)
- On board Two Line LCD Display (2x16)
- On board I2C EEPROM (4K-AT24C04)
- On board I2C RTC (DS 1307) with Crystal and Battery
- Four multiplexed 7-Segment LED Display
- Built in Matrix keyboard (12 keys)
- Built in Pull-Up (4 Keys) Keyboard
- Built in IR Sensor Interface – TSOP 1738
- Built in 8 LED Interface to test I/O
- On Board External Interrupt and Reset buttons
- Built in Pot interface to ADC
- On Board Temperature Sensor Interface (LM35)
- On Board Buzzer Interface
- On Board PWM Output pin
- On Board ICD Connector for Debugging/Programming
- On Board ICSP Connector
- On Board 20 MHz Crystal Oscillator
- On Board Power LED Indicator
- All Port Pins available at IDC (2x5) Connector
- Can be used as main board for developing applications
- Power Supply Reverse Polarity Protection
- On Board 1 Amp Voltage Regulator
- Demo HEX codes included for testing of board features
- Example codes included
- Microchip PIC 16F877A (with 20 MHz Crystal Oscillator & Boot loader Software)
- High Performance RISC CPU
- 8 K Words Programmable Flash Memory
- 368 bytes Data Memory (RAM)
- 256 bytes EEPROM
- 20 MHz Operation (200ns instruction cycle)
- 33 I/O pins
- 8-Channel 10-bit Analog to Digital Converter (ADC)
- Two PWM Channels
- Two Capture modules (16-bit with max. resolution 12.5 ns)
- Two Compare modules (16-bit with max. resolution 200 ns)
- Two 8-Bit Timer/Counter
- One 16-Bit Timer/Counter
- One Serial USART
- One Master Synchronous Serial Port (MSSP)
- One Serial Peripheral Interface(SPI) Module
- One Inter-Integrated Circuit (I2C) Module
- Power-On Reset (POR), Power-Up Timer (PWRT) and Oscillator Start-up Timer (OST)
- Interrupt Capability (up to 14 sources)
- Eight Level Deep Hardware Stack
- ICSP Programming
- Brown Out Reset
- Low Voltage Programming
- Power Saving Sleep Mode
- Programmable Code Protection
- Fully Static Design
- Wide Operating Voltage 2.0V to 5.5V
- Low Power Consumption
- 1x Fully Assembled and Tested eCee PIC16F877A Development board
- 1x Teach Yourself (Paperback)
- 1x RS232 Serial Cable
- 1x USB Cable A to B
- 5x Jumpers
- 4x Spacer
- 8x Screw
- DVD with
- User Manual
- Tutorial
- Datasheets
- Schematic
- Development Tools (Demo Version)
- Sample Hex Code
- Example Codes
- *User Manual
- Datasheets
- Schematic Diagram
- Softwares
