AVR ATmega32 Teach Yourself Kit - rhydoLABZ
This product qualifies for free shipping
Exciting news! Orders over 1999/- now get free shipping. Happy shopping with complimentary shipping!
- Stock: Out Of Stock
- Brand: rhydoLABZ
- Model: TYS-1133
- Weight: 1.60kg
- MPN: TYS-1133
Rs 5,199.00
(Excluding GST)
Description: The eDu AVRmega32 is Atmel's AVR ATmega32 microcontroller self study kit, suitable for teaching and learning embedded system programming. This tutorial is intended to give a detailed picture of programming Atmel's ATMEGA16 microcontroller. The tutorial kit includes all necessary tools to assist you in developing various applications.
The ATmega32 is a low-power CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture. By executing powerful instructions in a single clock cycle, the ATmega32 achieves throughputs approaching 1 MIPS per MHz allowing the system designer to optimize power consumption versus processing speed.The ATmega32 has 32K bytes of In-System Programmable Flash Program memory with Read-While-Write capabilities, 1024 bytes EEPROM, 2K byte SRAM, 32 general purpose I/O lines, a JTAG interface for Boundary-scan, On-chip Debugging support and programming, three flexible Timer/Counters with compare modes, Internal and External Interrupts, a serial programmable USART, a byte oriented Two-wire Serial Interface, an 8-channel, 10-bit ADC and an SPI serial port.
Note: The USB connector, provided on board, is only for powering.
eCee AVR ATMega32 Features:
- Compact and Ready to use design
- Professional EMI/RFI Complaint PCB Layout Design for Noise Reduction
- High Quality Two layer PTH PCB
- Includes AT MEGA32 Microcontroller
- Board Supports AVR AT MEGA16AT MEGA8535 Microcontrollers
- No separate programmer required (Built in Boot loader)
- No Separate power adapter required (USB power source)
- Screw terminal for External power Supply (with Jumper Select Option)
- External Power Supply range of 7V to 20V
- Adaptor (any standard 9-12V power supply) option
- RS-232 Interface (For direct connection to PC’s serial port)
- On board Two Line LCD Display (2x16)
- On board I2C EEPROM (4K-AT24C04)
- On board I2C RTC (DS 1307) with Crystal and Battery
- Four multiplexed 7-Segment LED Display
- Built in Matrix keyboard (12 keys)
- Built in Pull-Up (4 Keys) Keyboard
- Built in IR Sensor Interface – TSOP 1738
- Built in 8 LED Interface to test I/O
- On Board External Interrupt and Reset buttons
- Built in Potentiometer interface to ADC
- On Board Temperature Sensor Interface (LM35)
- On Board Buzzer Interface
- On Board PWM Output pin
- On Board JTAG Connector for Debugging/Programming
- On Board ISP Connector
- On Board 16 MHz Crystal Oscillator
- On Board Power LED Indicator
- On Board DB9 Connector
- On Board USB Connector
- All Port Pins available at IDC (2x5) Connector
- Can be used as main board for developing applications
- Power Supply Reverse Polarity Protection
- On Board 1 Amp Voltage Regulator
- Demo HEX codes included for testing of board features
- Example codes included
- Atmel AVR AT Mega32 with 16 MHz Crystal Oscillator (With Boot loader Software)
- 32 K bytes programmable flash
- 2 K bytes SRAM
- 1024 bytes EEPROM
- 16 MHz operation (Up to 16MIPS)
- 32 I/O pins
- 8 channel 10 bit ADC
- 4 PWM Channels
- Two 8-Bit Timer/Counter
- One 16-Bit Timer/Counter
- One Serial USART
- 1 Two Wire Serial Interface TWI
- SPI Master/ Slave
- Power Consumption ~ 20 mA
- 1x Fully Assembled and Tested eCee AVRMega32 Development board
- 1x Study AVR (Paperback)
- 1x RS232 Serial Cable
- 1x USB Cable A to B
- 5x Jumpers
- 4x Spacer
- 8x Screw
- DVD with
- User Manual
- Tutorial
- Datasheets
- Schematic
- Development Tools (Demo Version)
- Sample Hex Code
- Example Codes
- *User Manual
- Datasheets
- Schematic Diagram
- Softwares
Tags:
AVR ATmega32
, Atmel
, AVR
, ATMEGA16
, 8 bit microcontroller
, ADC
, Teach Yourself Kit
, Teach Kit