If you are looking for a board that (almost) does it all, look no further! The SparkFun Artemis Thing Plus takes popular Thing Plus footprint and adds in the powerful Artemis module for ultimate functionality. Fully compatible with SparkFun's Arduino core, the modern USB-C connector makes it e..
The RedBoard Artemis ATP is affectionately called 'All the Pins!' at SparkFun. The Artemis module has 48 GPIO and this board breaks out absolutely every one of them in a familiar Mega like form factor. What's with the silkscreen labels? They're all over the place. Sparkfun decided to label the pins ..
The SparkFun Qwiic Micro is molded to fit the standard 1"x1" Qwiic standard size which makes it one of smallest micro-controller offerings to date. As it's core is the powerful and versatile ATSAMD21E18, which is an ARM Cortex M0+, 32-bit microcontroller, with 256KB of flash memory that can run at u..
With a 32-bit ARM Cortex-M4F MCU, the SparkFun SAMD51 Thing Plus is one of the most powerful microcontroller boards yet! The SAMD51 Thing Plus provides with an economical and easy to use development platform if you're needing more power with minimal working space. This Thing even comes flashed with ..
The SparkFun AST-CAN485 Dev Board is a miniature Arduino in the compact form factor of the Pro Mini. In addition to all the usual features that a mini Arduino has, it possesses an onboard CAN (Control Area Network) and RS485 ports, enabling quick and easy interfacing to a multitude of industrial dev..
Its super small, simple & inexpensive. The Qduino Mini is perfect to embed in your electronics projects. It is arduino compatible & is fully open source. It has got a battery connector & charger built-in, & a fuel gauge that can tell you when to charge the battery!
All of the desi..
Description: The STM32 Nucleo-32 board provides an affordable and flexible way for users to try out new concepts and build prototypes with any STM32 microcontroller line in 32-pin packages, choosing from the various combinations of performance, power consumption and features. The Arduino nano connec..
If you’re ready to step your Arduino game up from older 8-bit/16MHz microcontrollers, the SparkFun SAMD21 Dev Breakout is a great landing spot. The SparkFun SAMD21 Dev Breakout is an Arduino-sized breakout for the Atmel ATSAMD21G18, a 32-bit ARM Cortex-M0+ processor with 256KB flash, 32KB SRAM, and ..
The SparkFun Photon RedBoard, to put it simply, is a WiFi/Microcontroller development board in the Arduino form-factor for the Photon. It’s easy to use, it’s powerful, and it’s connected to the cloud. With the best support, potential, and performance the Photon RedBoard provides you with an IoT devi..
Fio v3 - ATmega32U4 is a new spin on the Arduino Fio hardware powered by the ATmega32U4. Not only is it small and LiPo ready, it’s a very capable XBee ready development board.
The JST-connector and 3.3v system voltage make this a great development tool for portable devices, simply plug in a Li-Po..
The LilyPad Arduino USB is a microcontroller board based on the ATmega32u4. It has 9 digital input/output pins (of which 4 can be used as PWM outputs and 4 as analog inputs), an 8 MHz resonator, a micro USB connection, a JST connector for a 3.7V LiPo battery, and a reset button. It contains ev..
Seeeduino ADK Main Board is based on Android Open Accessory Development Kit(ADK). Compared to the Google's ADK Reference design, Seeeduino ADK has many added features like support of both 5V and 3.3V I/O (logic with a switch), smaller form-factor, better placement of reset button, pads for more pin-..
Seeeduino Lite shares many similarities with Arduino Leonardo. It is a microcontroller board based on Atmega32U4 chip. The chip has about the same amount of flash, RAM and capability as the ATmega328 found in the Seeeduino. It has 20 digital I/Os (7 of which can output PWM),a micro USB connection, a..
Seeeduino is Arduino compatible board. Based on Duemilanove Schematic, 100% compatible to its existing program, shield and IDEs. On the hardware part, remarkable changes are taken to improve the flexibility and user experience.
Features:
Microcontroller Atmel ATmega328
Board (Boot-loa..
Description: ArduiPi is a new board that bring low level Arduino features combined with high level features of a Raspberry PI.
Arduino is pretty cool but as soon you want to connect it to network, shield are quite expensive and web server will take lot of space into your Arduino and taking some ..