WizFi220 Low Power Serial WiFi Module with Power Amp (UFL)
This product qualifies for free shipping
Exciting news! Orders over 1999/- now get free shipping. Happy shopping with complimentary shipping!
- Stock: In Stock
- Brand: Wiznet
- Model: WRL-2041
- Weight: 0.02kg
- MPN: WizFi220_CON
Rs 3,478.00
(Excluding GST)
Description: The WizFi220_CON is an ultra low power serial to WiFi module with power amplifier. The module provides serial UART interface which enables connection to any embedded design utilizing and 8/16/32-bit microcontroller via simple commands. The module supports data rates up to 11 Mbps, and is compliant with 802.11b. The Serial to Wi-Fi embedded software allows devices and appliance manufacturers to easily add WiFi capabilities to their products with minor impact on the host microcontroller firmware. The WizFi220 provides all the hardware and software necessary to quickly set up a serial (UART) based link to a PC or external microcontroller.
Note: Requires External WiFi Antenna with UFL connector
Features:
Note: Requires External WiFi Antenna with UFL connector
Features:
- Brings Wi-Fi connectivity to any device with a microcontroller and serial HOST interface (UART)
- Quick Booting Time : under 20msec
- Minimal Serial to Wi-Fi “driver †footprint on host microcontroller and minor changes to existing host MCU firmware
- Offloading of smaller host microcontrollers from the Wi-Fi and TCP/ IP networking
- Simple AT commands for configuration and data communication
- U.FL antenna connector
- DHCP/Static IP, TCP/UDP, Server/Client, DNS, ARP
- Easy device provisioning through our utility or Wi-Fi Protected Set-up (WPS)
- Ultra low power consumption through dynamic power management
- Operates with standard 802.11 b/g/n access points at speed up to 11 Mbps (802.11b)
- Security protocols (WEP, WPA, WPA2-PSK, Enterprise, EAP-FAST, EAP-TLS, EAP-TTLS, PEAP)
- DSSS and CCK modulation
- Rich I/O interfaces (SPI, UART, GPIO, I2C, ADC, JTAG)
- Low power modes, Alarm Input for wake-up
- High-throughput hardware AES and RC4 encr yption/decryption engines
- Size 32 x 23,5 x 2,9 mm
- CE, FCC, KCC certified
- Limited AP Feature (Direct Connection to iPhone, iPad and Android-Phone without AP)Â
- 3.3V power source
- Radio Protocol IEEE 802.11b/g/n CompatibleÂ
- Supported Data Rates 11, 5.5, 2, 1 Mbps (IEEE 802.11b)
- Modulation DSSS and CCK
- RF Operating Frequency 2.4 - 2.497 GHz
- Antenna Options Chip antenna and U.FL connector for external antenna
- Networking Protocols UDP, TCP/IP (IPv4), DHCP, ARP, DNS, HTTP/HTTPS Client and Server(**)
- Power ConsumptionÂ
- Standby: 34μA
- Receive: 125mA
- Transmit: 290mA
- RF Output Power (Typical) 17dBm ± 1.5dBÂ
- Security Protocols WEP, WPA/WPA2?PSK, Enterprise (EAP-FAST, EAP-TLS, EAP-TTLS, PEAP)(**)
- I/O Interface UART, SPI(**), I2C(*), WAKE, ALARM, GPIOs
- Power Source 3.3V
- Dimensions 32 x 23.5 x 3 mm