Menu
Your Cart

ESP-12F WiFi Module Based On ESP8266

ESP-12F  WiFi Module Based On ESP8266
ESP-12F  WiFi Module Based On ESP8266
ESP-12F  WiFi Module Based On ESP8266
ESP-12F  WiFi Module Based On ESP8266
ESP-12F  WiFi Module Based On ESP8266
ESP-12F  WiFi Module Based On ESP8266
ESP-12F  WiFi Module Based On ESP8266
ESP-12F  WiFi Module Based On ESP8266
ESP-12F WiFi Module Based On ESP8266
  • Stock: In Stock
  • Model: WRL-3755
  • Weight: 0.01kg
  • MPN: ESP-12F
Rs 138.00
(Excluding GST)

Description : The ESP-12F, ESP8266 Wi-Fi Module is an integrated chip it can handle all the necessary overhead for communicating with our network, such as TCP/IP stack and 802.11 networks. It is completely addressable over SPI and UART protocols to connect our sensors or project directly to it through its GPIO’s. ESP8266 Serial Wi-Fi  Wireless Transceiver Module is capable of either hosting an application or offloading all Wi-Fi networking functions from another application processor.
 

Each ESP8266 module comes  pre-programmed with an AT command set firmware, so it can simply hook to Arduino device and get about as much Wi-Fi ability as a Wi-Fi Shield offers. The ESP8266 supports APSD for VoIP applications and Bluetooth co-existence interfaces, it contains a self-calibrated RF allowing it to work under all operating conditions and requires no external RF parts.

The ESP8266 module is an extremely cost-effective board with a huge, and ever-growing, community. ESP8266 Serial WiFi Wireless Transceiver Module has a powerful enough onboard processing and storage capability that allows it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime.


Features :
  • Communication interface voltage  : 3.3V
  • Working current  :  240mA (MAX)
  • Serial port baud rate  :  115200 (default) 
  • Serial communication format  :  8N1
  • Wireless Network Mode  : station / softAP / SoftAP + station
  • Wireless criteria  : 802.11 b / g / n 
  • Output power  : +19.5dBm
  • Power down leakage current  : <10uA
  • WIFI @ 2.4 GHz, support for WPA / WPA2 security mode 
  • Easy to develop projects with AT commands
  • Surface Mount Package with 2mm Pitch Pads
  • Multiple  GPIO’s for all sensor needs
  • Integrated TCP/IP protocol stack
  • Integrated Wi-Fi MAC/ BB/RF/PA/LNA
  • Integrated low power 32-bit CPU could be used as an application processor
  • Supports UART,GPIO,ADC, PWM, I2C
  • Wake up and transmit packets  : < 2ms
  • Pin pitch  :  2.0mm
     

Documents :

Write a review

Please login or register to review