ESP8285-M2 Wifi Module

ESP-M2 is encapsulated by the high performance chip ESP8285, which is equal to ESP8266 chip plus 1M Flash. The chip ESP8285 is encapsulated a advanced Tensilica’s L106 32-bit CPU, together with SRAM. ESP8285 has the full and complete WiFi fuction, which can used independently and alsoused as a slaver with other Hoster MCU, which can start directly from the out-built Flash. In addition, the built-in high-speed buffer is benefit for the system performance. Especially, ESP8285 can be used as a WiFi adapter by SPI/SDIO and/or I2C/UART interface, when it is applied to the other MCU design

Features of Esp8285-M2 Wifi Module

• Ultra-small size
• Support serial to WiFi
• Wireless transparent transmission
• Long distance transmission with ultra-low power
• Support outboard antenna
• Bearing high temperature to 125 ℃, compared to the 85℃ for ESP8266.

SOC characteristics
 

• Built-in Tensilica L106 ultra-low power 32-bit CPU, main frequency supports 80MHz and160MHz, and RTOS
• Built-in TCP/IP protocol
• Built-in one-channel 10-bit high precision ADC
• Outboard interface: HSPI, UART, I2C, I2S, IR Remote Controk, PWM, GPIO
• Deep sleep current is 10uA, the cut-off current is smaller than 5uA
• Wake,connect and transmission data package within 2ms
• The consume power is smaller 1.0Mw (DTIM3) when at stand by status
• Built in 1M byte for SPI Flash.

WiFi characteristics
 

• Support 802.11 b/g/n/e/I
• Support Station, Soft AP, Soft AP+STA mode
• Support WiFi Direct (P2P)
• Support CCMP (CBC-MAC, computation mode), TKIP (MIC, RC4), WAPI (SMS4), WEP (RC4), CRC etc., for hardware acceleration.
• P2P finding, P2P GO mode/ GC mode and P2P power manage
• WPA/PA2PSK and WPS
• 802.11 security certification: pre-certification and TSN
• Support 802.11n (2.4GHz)
• 802.1h/RFC1042 frame encapsulation
• Support seam less roaming
• Support AT remote update and cloud update (OTA)
• Support Smart Config function (including Android and Ios device).

Module interface:
 

• 2* UART
• 1*ADC
• 1*En
• 1*wakeup pin
• 1*HSPI
• 1*I2C
• 1*I2S
• More than 10*GPIOs
• Working temperature: -40℃-+125℃℃

Package includes:
 

• 1 x Esp8285-M2 Wifi Module

Development resources:
 

• Datasheet