Description: Infrared proximity sensor made by Sharp. This has an analog output that varies from 3.1V at 10cm to 0.4V at 80cm. The sensor has a Japanese Solderless Terminal (JST) Connector. We recommend soldering wires directly to the back of the module.
Specifications:
Distance output type-an..
Description: This is a very small infrared receiver based on the TSOP85 receiver. This receiver has all the filtering and 38kHz demodulation built into the unit. Simply point a IR remote at the receiver, hit a button, and you'll see a stream of 1s and 0s out of the data pin.
Features of TSOP85 re..
This small digital distance sensor detects objects between 2 cm and 10 cm (0.8″ and 4″) away. With its quick response time, small size, and low current draw, this sensor is a good choice for non-contact object detection, and our compact carrier PCB makes it easy to integrate into your project.
Dime..
Infrared proximity sensor made by Sharp. Part # GP2Y0A02YK0F has an analog output that varies from 2.8V at 15cm to 0.4V at 150cm with a supply voltage between 4.5 and 5.5VDC. The sensor has a Japanese Solderless Terminal (JST) Connector. We recommend purchasing the related pigtail below or soldering..
Description : Pair of Infrared LED and Photo diode tuned to same IR wavelength. You can use this sensors for your Roboics, Pulse Oximeter and other applications.
Features:
IR LED (TSFF5210)
Package type: leaded
Dimensions : 5mm
Leads with stand-off
Peak wavelength: λp = 870 nm
High ..
Description: The TSOP1738 series are miniaturized receivers for infrared remote control systems. PIN diode and preamplifier are assembled on lead frame, the epoxy package is designed as IR filter. The demodulated output signal can directly be decoded by a microprocessor. TSOP1738 is the standard I..