Model: SEN-2684
Brand: Chineese
This Weight Sensor amplifier is based on HX711, which consists of an amplifier and a precision 24-bit analog-to-digital convertor designed for weigh scale and industrial control applications to interface directly with a bridge sensor. The HX711 uses a two wire interface (Clock and Data) for communic..
Rs 249.00
Model: SEN-1781
Description: The Minisense 100 is a low-cost cantilever-type vibration sensor loaded by a mass to offer high sensitivity at low frequencies. Useful for detecting vibration and 'tap' inputs from a user. A small AC and large voltage (up to +/-90V) is created when the film moves back an forth. A simple..
Rs 379.00
Model: SEN-1734
Description: A simple flex sensor 2.2" in length. As the sensor is flexed, the resistance across the sensor increases i.e the resistance of the flex sensor changes when the metal pads are on the outside of the bend (text on inside of bend).
Connector is 0.1" spaced and bread board friendly.
No..
Rs 639.00
Model: SEN-1684
Description: The Minisense 100 is a low-cost cantilever-type vibration sensor loaded by a mass to offer high sensitivity at low frequencies. Useful for detecting vibration and 'tap' inputs from a user. A small AC and large voltage (up to +/-90V) is created when the film moves back an forth. A simple..
Rs 349.00
Model: SEN-1681
Brand: Unknown
Description: This is a very long force sensitive resistor - over 2 feet - has a sensing area of 0.25x24". This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied to the FS..
Rs 1,999.00
Model: SEN-1680
Brand: Unknown
Description: Piezo elements come in handy when you need to detect vibration or a knock. You can use these for tap or knock sensors pretty easily by reading the voltage on the output. They can also be used for a very small audio transducer such as a buzzer.
Package includes:
1 x Piezo Element
..
Rs 139.00
Model: SEN-1675
Brand: Unknown
Description: This is a small force sensitive resistor. It has a 0.16" (4 mm) diameter active sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied to the F..
Rs 599.00
Model: SEN-1638
This load sensor is the same one found in digital bathroom scales (you know, the ones you use in January for your New Year's resolutions, and then forget about a month later). This sensor can measure up to about 110 pounds. Check the links below for a simple explanation on how these work and how to ..
Rs 991.00
Model: SEN-1531
Description: These are very thin variable potentiometers. By pressing down on various parts of the rotary dial, the resistance linearly changes from 100Ohms to 10,000Ohms allowing the user to very accurately calculate the relative position on the rotary. Can be used as an accurate positional indicat..
Rs 1,299.00
Model: SEN-1520
Description: This is a piezoresistive force sensor. The harder you press, the lower the sensor's resistance. Pressing lightly, the resistance changes from infinite to ~300k. The sensor itself is thin and flexible, but the resistance does not change while being flexed. Resistance changes only when pr..
Rs 1,999.00
Model: SEN-1519
Description: This is a piezoresistive force sensor. The harder you press, the lower the sensor's resistance. Pressing hard, the resistance changes from infinite to ~300k. The sensor itself is thin and flexible, but the resistance does not change while being flexed. Resistance changes only when press..
Rs 1,899.00
Model: SEN-1518
Description: This is a piezoresistive force sensor. The harder you press, the lower the sensor's resistance. Pressing hard, the resistance changes from infinite to ~300k. The sensor itself is thin and flexible, but the resistance does not change while being flexed. Resistance changes only when press..
Rs 1,999.00
Model: SEN-1516
Description: A simple flex sensor 4.5" in length. As the sensor is flexed, the resistance across the sensor increases. The resistance of the flex sensor changes when the metal pads are on the outside of the bend (text on inside of bend).
Connector is 0.1" spaced and bread board friendly. Check d..
Rs 671.00
Model: SEN-1515
Description: These are very thin variable potentiometers. By pressing down on various parts of the strip, the resistance linearly changes from 100 Ohms to 10,000 Ohms allowing the user to very accurately calculate the relative position on the strip. Can be used as an accurate positional indicator fo..
Rs 559.00
Model: SEN-1302
Brand: Sparkfun - USA
This is a force sensitive resistor with a round, 0.5" diameter, sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied to the FSR its resistance will be lar..
Rs 559.00