Model: ROB-2244
Description: A battery holder is one or more compartments or chambers for holding a battery.A battery holder is either a plastic case with the shape of the housing molded as compartments that accepts batteries. Coiled spring wire or flat tabs that press against the battery terminals are the two mos..
Rs 60.00
Model: ROB-2235
Brand: Dagu
Description: The Dagu Polymorph - 1Kg is a non-toxic, biodegradable polyester with a low melting temperature of about 60°C (140°F). Prototype plastic parts can be made by simply heating in hot water until it is clear and then shaping by hand. When cool it becomes a nylon like white plastic. Polymo..
Rs 3,430.00
Model: ROB-2233
Brand: Dagu
Description: This is the Dagu Mini Pan and Tilt Kit. The kit includes original brackets, two miniature servos, a new bracket to hold the tilt servo and all the nuts, bolts etc.This pan/tilt kit has mounting holes to suit almost any range sensor.
Features:
Includes 2 miniature servos
Features mou..
Rs 963.00
Model: ROB-2231
Brand: Dagu
Description: The Dagu Nickel-Plated Brass Hubs Four Pack - 4mm Shaft is used to fit the all terrain wheels to the 4mm shafts of geared motors RS003A and RS003B. These brass fittings are nickel plated and come with stainless steel screws...
Rs 288.00
Model: ROB-2226
Brand: Dagu
Description: The miniature servo magnetic clutches from DAGU fit on your servo just like a standard servo horn. Unlike a standard servo horn, these clutches will slip when excessive force is applied to prevent your servo gears from breaking. Typical holding torque for the standard configuration i..
Rs 412.00
Model: ROB-2225
Brand: Dagu
Description: The simple encoder kit from DAGU consists of two neodymium 8-pole magnets with rubber hubs and two hall-effect sensors terminated with 150mm (6inch) cable and 3 pin female servo headers.The magnets have 4 north poles and 4 south poles and are strong enough that the sensor can detect the..
Rs 814.00
Model: ROB-2215
Brand: Dagu
Description: This is the "High Power Switch" from DAGU. Originally designed for the "Wild Thumper" robot chassis's it is a very versatile switch that can be used with any robot that draws more than the 2-3A that most small switches can handle.This switch will work with batteries from 6V to 24V with ..
Rs 1,299.00
Model: ROB-2214
Brand: Dagu
Description: This controller board is built by Dagu specifically for their robot
platforms. It essentially combines an Arduino development board with a
dual H-bridge motor driver all bolted down to an aluminum heatsink. The
heart of the board is an ATMega168 AVR microcontroller which comes
loade..
Rs 7,171.00
Model: ROB-2199
This vacuum pump really sucks! This pump operates at 12V and has enough suction for most small projects. Sparkfun has even used one to make a custom universal gripper (video) using coffee grounds, balloon and some other parts.
Vacuum Pump Features:
12V motor
12W operation
¼" barbs
0-16" Hg ..
Rs 1,659.00
Model: WEE-2147
Description: Good Quality Dummy motor made with Plastic with 6mm shaft diameter.
Features:
6mm Shaft Diameter
2 screw Hole for fixing on cabinet
Nut for Fixing with Cabinet
Shaft with 3mm Hole for wheel tightening
..
Rs 36.00
Model: ROB-2022
Brand: SpringRC
Description: SPRINGRC Make PF61C system is an entry level FM/PPM transmitter Receiver pair with 6 channels. This transmitter Requires 8 AA batteries.
You can use this for all sorts of projects including (but not limited to) tanks, airplanes, helicopters, scale models of the Weinermobile, blimps ec..
Rs 6,185.00
Model: ROB-2021
Brand: SpringRC
Description: SPRINGRC Make TG61 Series 2.4GHz system is an entry level transmitter Receiver pair offering the reliability of 2.4GHz signal technology with 6 channels. This transmitter Requires 8 AA batteries.
You can use this for all sorts of projects including (but not limited to) tanks, airplanes..
Rs 6,514.00
Model: ROB-1767
Brand: Pololu - USA
The IR beacon is a compact board that is used in pairs to allow robots to locate each other. Each board has infrared emitters that shine in all directions and four IR receivers for detecting the other beacon. The IR beacons have a range of about fifteen feet indoors. This item is for a single unit. ..
Rs 1,699.00
Model: MOT-1747
Brand: Pololu - USA
Description: This 12" (30 cm) harness has an inline on/off switch, with a 0.1" 3-pin female connector on one end and both a male and a female connector on the other. This 3-wire harness can be used to add a toggle switch between any two devices that can be connected with “JR†style servo connec..
Rs 248.00
Model: ROB-1567
Brand: Pololu - USA
Description: The Pololu Pushbutton Power Switch is a patented design initially created for Orangutan Robot Controllers as an alternative to bulky mechanical switches. The switch is intended to be the main power switch for a DC device requiring up to several amps of current. This item is the 2.5-7.0 ..
Rs 541.00