Your Cart

Motor Drivers

Model: ROB-2217 Brand: Dagu
Description: The Dagu ''Magician'' Dual 0.8A Robot Controller is a low cost, Arduino compatible controller that uses the ATmega8 processor and comes preloaded with the Arduino boot loader. The USB interface allows the controller to be easily programmed with the Arduino IDE and a USB cable. It is des..
Rs 2,409.00
Model: ROB-2216 Brand: Dagu
 Description: The Red Back Spider controller from Dagu Electronics is an Arduino Mega compatible robot controller designed specifically for robots that use a large number of servos such as Humanoids, Hexapods and Serpents. All IO pins are laid out with power and ground for easy connection to servos ..
Rs 460.00
Model: ROB-2213 Brand: Dagu
  Description: Each channel is rated for 4A of stall current and each channel has its own current monitoring circuit. Low resistance FET "H" bridges ensure high efficiency and good motor torque. Built in control logic allows each motor to be controlled by 2 pins. One pin for speed and one for direc..
Rs 1,449.00
Model: ARD-2124 Brand: Arduino - Italy
Description: The Arduino Motor Shield from Arduino-Italy is based on the L298, which is a dual full-bridge driver designed to drive inductive loads such as relays, solenoids, DC and stepping motors. It lets you drive two DC motors with your Arduino board, controlling the speed and direction of each ..
Rs 1,599.00
Model: ROB-1831 Brand: Pololu - USA
Description: This version of the product is packaged as a partial kit in which the surface-mounted components are already assembled. Male header pins and a DB9 connector are included, but they need to be soldered in by the user.The Serial 8-servo controller allows you to control up to eight RC servo..
Rs 1,779.00
Model: ROB-1766 Brand: Pololu - USA
Description: This Simple Controller 18v7 makes basic control of brushed DC motors easy, with free Simple Motor Control Center software enabling quick configuration over USB. This version operates from 5.5 to 30 V and is efficient enough to deliver a continuous 7 A (>30 A peak) without a heat sink. I..
Rs 3,399.00
Model: ROB-1764 Brand: Pololu - USA
Description: This breakout board for Freescale’s MC33926 full H-bridge has an operating range of 5 – 28 V and can deliver almost 3 A continuously (5 A peak) to a DC motor. The MC33926 works with 3 – 5 V logic levels, supports ultrasonic (up to 20 kHz) PWM, and features current feedback, under-voltag..
Rs 1,399.00
Model: ROB-1709 Brand: Pololu - USA
Description: The six-channel Micro Maestro raises the performance bar for serial servo controllers with features such as a native USB interface and internal scripting control. Whether you want high-performance servo control (0.25μs resolution with built-in speed and acceleration control) or a genera..
Rs 1,699.00
Model: ROB-1706 Brand: Pololu - USA
This tiny board is an easy way to use Toshiba’s TB6612FNG dual motor driver, which can independently control two bidirectional DC motors or one bipolar stepper motor. A recommended motor voltage of 4.5 – 13.5 V and peak current output of 3 A per channel (1 A continuous) make this a great motor drive..
Rs 399.00
Model: ARD-1619 Brand: Sparkfun - USA
Description: The new version of this shield allows for either 3.3 or 5v logic, a separate and more robust VIN connection, and the PWM input has moved to pin 3.This is a motor shield for Arduino that will control two DC motors. Based on the L298 H-bridge, the Ardumoto can drive up to 2 amps per chann..
Rs 1,666.00
Model: ROB-1449 Brand: Sparkfun - USA
Description: The SparkFun Serial Controlled Motor Driver allows you to control up to two DC motors using a serial command interface. The serial interface is easy to use and it lets the user select an individual motor, the direction, and the desired speed constant (up to 10 different speed from stop ..
Rs 1,645.00
Model: ROB-1413 Brand: Pololu - USA
Description: This tiny module can control two motors, 1 A peak each, and you can daisy-chain multiple units to control up to 62 motors with a single serial line. Pololu’s popular micro motor controller will get your robot running in a snap. The tiny module can individually control two motors, and ..
Rs 1,986.00
Model: ROB-1412 Brand: Pololu - USA
Description: If you want more current than our small motor controllers can handle, or if you want to do position or speed feedback to make your own closed-loop servo system, take a look at our 3-Amp motor controller!The 3-Amp motor controller with multiple interface and feedback options simplifies s..
Rs 3,752.00
Model: ROB-1411 Brand: Pololu - USA
Description: The qik 2s12v10 adds a comprehensive yet easy-to-use, high-power option to Pololu’s line of motor controllers. The compact board—it’s almost the same size as the dual VNH2SP30 carrier board by itself—allows any microcontroller or computer with a serial port to drive two brushed DC motor..
Rs 5,549.00
Model: ROB-1410 Brand: Pololu - USA
  Description: The jrk 21v3 motor controller is a highly configurable brushed DC motor controller that supports four interface modes: USB, logic-level serial, analog voltage, and hobby radio control (RC). The controller can be used with feedback for closed-loop speed or position control, or it can ..
Rs 3,899.00
Showing 46 to 60 of 67 (5 Pages)