Description: Dagu 2WD Self-Balancing Chassis is an ideal platform to build a self balancing robot. Powered by two 12V, 126rpm, DC all metal gear motors. 28mm wide wheels with wear resistant rubber grip gives great traction, which is crustal to make it self balancing. Not to mention, the 3mm thick al..
Description: The MiP Robotic Platform is the first self-balancing robot that you get to control and play games with. The MiP can drive, dance, plays games, battle with other MiPs, respond to simple hand motions and can be remotely controlled by a compatible iOS or Android device. Thanks to a suite o..
Description: The FT-17DOF-PW 17 DOF Humanoid Robot is a ready to play humanoid robot which comes fully assembled & completed from. This humanoid robot uses 17 micro servos.17 degrees of freedom bi-pedal robot consists mainly of a head, a torso, two arms, two legs. All digital servo with large torque..
Description: The EllipZo-robotic chassis is a light weight, low cost, medium capacity multipurpose robotic chassis which provides a great opportunity for starters to give shape to their robotic ideas.
EllipZo is cut out of a 3mm acrylic sheet which provides a strong and rigid platform to buildrobot..
The R-Bot robotic chassis is a light weight, low cost, compact, medium capacity multipurpose robotic chassis which provides a great opportunity for rookies as well as pros to quench at least a bit of their limitless robotic passion carvings.
R-Bot is cut out of a 3mm acrylic sheet with 15 cm diamet..
Description: iROVER-robotic chassis is a light weight, low cost, medium capacity multipurpose robotic chassis which provides a great opportunity for rookies as well as pros to quench at least a bit of their limitless robotic passion carvings.
iROVER robotic chassis is made of a 3mm thi..
Description: The EllipZo-robotic chassis is a light weight, low cost, medium capacity multipurpose robotic chassis which provides a great opportunity for starters to give shape to their robotic ideas.
EllipZo is cut out of a 3mm acrylic sheet which provides a strong and rigid platform to build ro..
The R-Bot robotic chassis is a light weight, low cost, compact, medium capacity multipurpose robotic chassis which provides a great opportunity for rookies as well as pros to quench at least a bit of their limitless robotic passion carvings.
R-Bot is cut out of a 3mm acrylic sheet with 15 cm diamet..
Description: iROVER-robotic chassis is a light weight, low cost, medium capacity multipurpose robotic chassis which provides a great opportunity for rookies as well as pros to quench at least a bit of their limitless robotic passion carvings.
iROVER robotic chassis is made of a 3mm thick acrylic..
Description: This Zumo robot is a low-profile tracked robot platform intended for use with an Arduino (or compatible device, such as an A-Star 32U4 Prime) as its main controller. It measures less than 10 cm on each side and weighs approximately 300 g with an Arduino Uno and batteries (165 g without,..
The Arduino Robot is the first official Arduino on wheels. The robot has two processors, one on each of its two boards. The Motor Board controls the motors, and the Control Board reads sensors and decides how to operate. Each of the boards is a full Arduino board programmable using the Arduino IDE.
..
Description: This Kit is a great choice for learning robotics, electronics and Arduino programming. It contains mechanical parts and electronic modules for you to start exploring the robot world, it can be used to build a robot tank or a three-wheel robot car. With the following electronic modules..
Description: This kit is your best choice to start exploring the robot world. You can use it to build a 2WD wheeled robot in just minutes, then switch to a robot tank easily. With metal parts and metal geared motor, your robots will look so cool! We recommend the Starter Electronic Kit to work to..
Description: This kit can be used to build a Music Robot. It can play the Xylophone by an application via USB cable installed on computer. By this application you can use your keyboard of computer to play the Xylophone by the Number Key from 1 to 7 directly. And you can also type a music score in..
Description: This kit can be used
to build a moving platform, wheeled robot or tracked robot, different
wheel configuration and track configuration are available. a robot arm
and a robot gripper can be added on the moving robot, there are spare
parts for building other kind of structure. The rob..