Model: ROB-2915
Brand: Chineese
L9110 Motor Control Driver is a dual channel motor driver controller board, which can control two DC motors, or a single four-wire two-phase stepper motor. The circuit uses the L9110 (HG7881) integrated circuits (IC), which consist of H-Bridge drivers.
The L9110S IC has TTL / CMOS compatible I/O, w..
Rs 199.00
Model: ROB-2816
High Current Motor Driver Module BTS7960 is actually an H-bridge driver based on the Infineon chips BTS7960. The BTS7960 is a high power H-bridge driver module with thermal over current protection. High Current Motor Driver BTS7960 circuitry with the 74HC244 chip effectively isolates the microcontro..
Rs 300.00
Model: ROB-2797
High quality Stepper motor 12V, 28BYJ48 stepper is mainly used in Air Conditioner Louver, small cooling/heating fan etc. It can be used in systems that requires accurate control. The motor is stable and it can be controlled easily using a ULN2003 Stepper Motor Driver.
Stepper motor Specification:
..
Rs 199.00
Model: IC-0150
Description: TB6612FNG is a Driver IC for Dual DC motor, with output transistor in LD MOS structure with low ON-resistor. Two input signals, IN1 and IN2, can choose one of four modes such as CW, CCW, short brake, and stop mode. Features:Power supply voltage: VM=15V (Max.)Output current: Iout=1.2A(av..
Rs 138.00
Model: ROB-2643
Description: The RoboClaw motor controller from Ion Motion Control (formerly Orion Robotics) can control a pair of brushed DC motors using USB serial, TTL serial, RC, or analog inputs. Integrated dual quadrature decoders make it easy to create a closed-loop speed control system. This version can sup..
Rs 7,599.00
Model: ROB-2634
Brand: Pololu - USA
Description: This motor driver board is an add-on for the Raspberry Pi Model B+, A+, or Pi 2 that lets it easily control a pair of bidirectional, brushed DC motors. The expansion board uses a pair of Freescale MC33926 motor drivers, which operate from 5 to 28 V and can deliver a continuous 3 A per c..
Rs 2,299.00
Model: ROB-2635
Brand: Pololu - USA
Description: The A-Star 32U4 Robot Controller LV with Raspberry Pi Bridge is a
programmable module well-suited for robotics applications, designed to
work either as an auxiliary controller mounted to a Raspberry Pi or as a
standalone control solution for a small robot. This A-Star (abbreviated
..
Rs 1,849.00
Model: ROB-2616
Brand: Sparkfun - USA
Description: The Big Easy Driver, designed by Brian Schmalz, is a stepper motor driver board for bi-polar stepper motors up to a max 2A/phase. It is based on the Allegro A4988 stepper driver chip. It’s the next version of the popular Easy Driver board.
Each Big Easy Driver can drive up to a max..
Rs 1,499.00
Model: ROB-2576
Brand: Pololu - USA
Description: This is a bulk-packaged version of Pololu's Black Edition A4988 Stepper Motor Driver Carrier that ships with 0.1″-pitch male header pins installed as shown in the main product picture, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. ..
Rs 699.00
Model: ROB-2575
Brand: Pololu - USA
Description: The Pololu high-power motor driver is a discrete MOSFET H-bridge designed to drive large DC brushed motors. The H-bridge is made up of one N-channel MOSFET per leg, and most of the board’s performance is determined by these MOSFETs (the rest of the board contains the circuitry to take u..
Rs 4,599.00
Model: ROB-2573
Brand: Dagu
Description: T Rex does not want to be fed, he wants
to hunt! The T Rex controller from DAGU is an Arduino compatible robot
controller designed to power and control servos and brushed motors. This
controller combines an Arduino development board with a dual FET
H-bridge motor driver. The hea..
Rs 6,999.00
Model: ARD-2569
Brand: SeeedStudio
Description:The Motor Shield is a driver module for motors that allows you to use
Arduino to control the working speed and direction of the motor. Based
on the Dual Full-Bridge Drive Chip L298, it is able to drive two DC
motors or a step motor. The Motor Shield can either be powered directly
by ..
Rs 1,749.00
Model: ROB-2472
Brand: Dagu
Description: Are you ready to control all the
servos? You’d better be, because the Spider Controller from Dagu is
definitely ready. With a 3A switch mode power supply (capable of driving
up to 48 micro servos) and the ATmega1280 MCU, the Spider Controller is
perfect for ‘bots requiring a la..
Rs 7,299.00
Model: ROB-2219
Brand: Dagu
Description: This is the Dagu Mr. Basic Dual 2A Motor Controller Board. This simple motor controller PCB is designed specifically for Mr. Basic. Capable of working from 3.6V - 6V this PCB provides speed (PWM) and direction control of 2 motors with up to 2A per motor. Over half of the PCB is double s..
Rs 681.00
Model: ROB-2218
Brand: Dagu
Description: The DAGU Mini-Driver control board is an Arduino based miniature control board with a number of add-ons making it ideal for embedded projects, Beginners and Educators. The controller includes an ATMEGA8 (5V @ 16Mhz) with Arduino boot loader, Dual Channel DC motor controller (up to 2.5Am..
Rs 1,049.00