







PIC18F4520 QuickStart board v2 - rhydoLABZ
- Stock: In Stock
- Brand: rhydoLABZ
- Model: QSB-2565
- Weight: 0.10kg
- MPN: QSB-2565
Rs 949.00
(Excluding GST)
Description: The All New Revised QSB (QuickStart Board) for PIC18F4520 is a Low Cost Development Board that can be used to quickly evaluate and demonstrate the capabilities of 40 PIN PIC18F4520 microcontroller. The board is designed to work as a header board with access to all pins for external connection. Ideally suitable for fast and easy development purposes at low cost.
Board features:
Board features:
- Compact and Ready to use design
- Includes PIC18F4520 Microcontroller
- Board Supports most of the 40pin PIC like PIC16F877A/4520/4550* Microcontrollers
- No separate Programmer required (Built in Bootloader)
- No Separate Power adapter required (USB powered)
- RS-232 Interface (For direct connection to PC’s serial port)
- All Port Pins available at Male Berg Strip and at female Berg housing connector
- On Board ICD Connector for Debugging ( Both RJ11 and 6PIN ICSP)
- Power Supply range of 7V to 20V
- On Board Power LED Indicator
- On Board Reset button
- On Board Port Pin LED connection for Board checking ( Jumper Selectable)
- On Board 20 MHz Crystal Oscillator
- Option to add external Crystals
- Can be used as header board for developing applications
- Power Supply Reverse Polarity Protection
- On Board 5V,1Amp Voltage Regulator
- On board 3V3 Voltage regulator IC and 3V3 available on Berg pins
- RMC connecter & DC Barrel Jack for External power Supply (with Jumper Select Option)
- Professional EMI/RFI Complaint PCB Layout Design for Noise Reduction
- High Quality Two layer PTH Glass Epoxy PCB
- High Performance RISC CPU
- 32 K Words Programmable Flash Memory
- 1536 bytes Data Memory (RAM)
- 256 bytes EEPROM
- Up to 40 MHz Operation
- 34 I/O pins
- 8-Channel 10-bit Analog to Digital Converter (ADC)
- Two PWM Channels
- Two Capture modules (16-bit with max. resolution 6.25 ns)
- Two Compare modules (16-bit with max. resolution 100 ns)
- Two 8-Bit Timer/Counter
- Two 16-Bit Timer/Counter
- One Serial USART (Supports RS-232 and RS-485)
- One Master Synchronous Serial Port (MSSP)
- One Serial Peripheral Interface(SPI) Module
- One Inter-Integrated Circuit (I2C) Module
- Power-On Reset (POR), Power-Up Timer (PWRT) and Oscillator Start-up Timer (OST)
- Interrupt Capability (up to 18 sources)
- ICSP Programming
- Brown Out Reset
- Low Voltage Programming
- Power Saving Sleep Mode
- Programmable Code Protection
- Fully Static Design
- Wide Operating Voltage 2.0V to 5.5V
- Low Power Consumption
- 1x Fully Assembled and Tested PIC18F4520 Quick Start board
- 1x PIC18F4520 Microcontroller
- 1x RS232 Serial Cable
- 1x USB cable
- 1x Jumpers - 2mm
- 4x Spacers
- 8x Screws
- 1x 2 Pin RMC Female connector with wire (2mm pitch)
- 1x Software CDROM with
- Schematic
- Programming Software
- Sample Code
Resources:
- Datasheets
- Schematic Diagram
- Softwares
- rhydoLABZ-wiki(More details)