AT89S52 Quickstart Board V2 - rhydoLABZ
- Stock: In Stock
- Brand: rhydoLABZ
- Model: QSB-2570
- Weight: 0.10kg
- MPN: QSB-2570
Rs 725.00
(Excluding GST)
AT89S52/AT89C51 Quick Start board is user friendly, multipurpose programmable board, for the beginner as well as a higher end user. This is a Low Cost Development Board that can be used to quickly evaluate and demonstrate the capabilities of Atmel AT89S52 / AT89C51 microcontroller. The board is designed to work as a header board with access to all pins for external connection. Ideally suitable for quick start development purposes. The board is designed for general purpose applications and includes a variety of hardware to exercise microcontroller peripherals.
Note: Separate programmer required for programming this device, we recommend buying
QSB AT89S52 Features:
- Compact and Ready to Use design
- Two layer High Quality PTH PCB
- Compatible with Atmel AT89C51/AT89C52/AT89S52 controllers
- Includes Atmel AT 89S52 Microcontroller
- No Separate power adapter required (USB powered)
- All Port Pins available at Male Berg Strip and at female Berg housing connector
- Separate ICSP Port for Atmel and Philips Controllers, available in 5X2 IDC connector
- RS232 Interface (For direct connection to PC’s serial port )
- External supply ranges from 7V to 20V DC
- On Board 11.0592 MHz Crystal Oscillator
- On board Reset Switch
- On board power indicator LED
- On Board Port Pin LED connection for Board checking ( Jumper Selectable)
- On Board 5V,1Amp Voltage Regulator
- RMC connector & DC Barrel Jack for External power Supply (with Jumper Select Option)
- Power Supply Reverse Polarity Protection
- Can be used as header board for developing applications
AT89S52 Chip Specifications:
- 8K Bytes of In-System Re-programmable Flash Memory
- Fully Static Operation: 0 Hz to 33 MHz
- Three-level Program Memory Lock
- 256 x 8-bit Internal RAM
- 32 Programmable I/O Lines
- Three 16-bit Timer/Counters
- Eight Interrupt Sources
- Programmable Serial Channel
- Low-power Idle and Power-down Modes
- 4.0V to 5.5V Operating Range
- Full Duplex UART Serial Channel
- Interrupt Recovery from Power-down Mode
- Watchdog Timer
- Dual Data Pointer
- Power-off Flag
- Fast Programming Time
- Flexible ISP Programming (Byte and Page Mode)
Package includes:
- 1x Fully Assembled and Tested AT89S52 Quick Start board
- 1x AT89S52 Microcontroller
- 1x RS232 Serial Cable
- 1x USB cable
- 1x Jumpers - 2mm
- 4x Spacers
- 8x Screws
- 1x 2 Pin RMC Female connector with wire (2mm pitch)
- 1x Software CDROM with
- Schematic
- Programming Software
- Sample Code
Documents:
- Datasheets
- Schematic Diagram
- Software
- rhydoLABZ-wiki(More details)