Description: The SparkFun Logomatic v2 takes everything we learned with multiple logging projects over the years and boils it down to an easy to use device, that is now more adaptable than ever! Version 2 incorporates the LPC2148 with microUSB, battery charging, FAT32 formatting, and microSD support..
Description: It's like a Xacto knife, only better. We use these extensively when working with PCBs. These small knives work well for cutting traces, scraping ground pours, and guiding hair-like wires into their proper place. Excel knife comes with aluminum handle, one ultra-sharp blade, and safety c..
Description: This is a through-hole version of the popular surface mount Simon kit. This newer version comes with an ATmega328 instead of the ATmega168. All components are through-hole, making this kit great for beginners. When building this kit, you'll have a chance to solder a 28-pin microprocesso..
This is a conductive knit fabric for use in e-textiles. It is similar in feel to a nylon ripstop material. It is highly conductive with a surface resistivity of < 1 ohm/sq. This is a great add-on to any LilyPad project.
If you aren't sure what to do with conductive fabrics, you have to check out th..
Description: These are good quality IC test hooks with a male connection wire. Instead of a single hook, these have two hooks that are capable of grabbing very small points (like SOIC IC legs). Comes in a bag of five IC hooks of different colors (black, red, white, blue, and green). We use them with..
Description: The SOMO-14D is a tiny Audio-Sound module that can play back pre-stored audio files such as voice and music from a micro-SD memory card. The module supports 4-bit ADPCM audio files with sample rates from 6Khz up to 32Khz. By using the freely available software tool, any WAVE(.wav) or M..
Description: This is an interface cable for the Bus Pirate, designed to connect to its 2x5 I/O header. The cable's connector is composed of two rows of five 0.1" spaced pins; it's also polarized, as is the mating connector on-board the Bus Pirate, so you can only connect the cable in one direction. ..
Description: This board is a unique board recommended by a SparkFun customer. When playing with SD, you sometimes need to view what the SPI traffic is doing, whether for hacking or debugging. The SD Sniffer allows you to hook up an external device, such as a logic analyzer or microcontroller, to vie..
Description: The latest and greatest MP3 decoding from VLSI. The VS1033 is a single-chip MP3/AAC/WMA/MIDI audio decoder and ADPCM encoder. It contains a high-performance, proprietary low-power DSP processor core VS_DSP4, working data memory, 5 KiB instruction RAM and 0.5 KiB data RAM for user applic..
Description: SPARKFUN USA make Breakout board for the microSD socket that is not much bigger than your fingernail. Compatible with the SPI interface found on any SD card, this tiny form factor was created for cell phone storage and is perfect for your next MP3 project! Board comes fully assembled an..
Voice Recorder Breakout - ISD1932 is a SPARKFUN - USA made breakout board for the ISD1932, a multiple-message record/playback device. This single chip can record up to 64 seconds worth of voice messages. Microphone inputs and speaker outputs are all handled by the ISD1932. A switch is connected to a..
Fingerprint Slide Scanner Interface Cable interfaces to the Fingerprint Slide Scanners 6 pin connector. Comes terminated as a MLX 1.25mm male connector to six open wires.
Dimensions:
~5.8" (150mm) long
Package includes:
1 x Fingerprint Slide Scanner Interface Cable..
uLog - The Lil'est Logger is a tiny analog logging device. Central to the logger is an ATtiny24 mated with an AT45DB161D 16Mbit flash IC. Sampling at 50Hz, it’ll log 3 channels of 10-bit ADC for about 2 hours before the memory fills up. Very stripped down and simple to use: at power up it determines..