HC-05 Bluebee XBEE Compatible Bluetooth (rhydoLABZ)
- Stock: Out Of Stock
- Brand: rhydoLABZ
- Model: WRL-2511
- Weight: 0.03kg
- MPN: WRL-2511
Rs 399.00
(Excluding GST)
Description: HC-05 Bluebee is a compact XBEE Socket compatible Bluetooth Module from rhydoLABZ. The module is designed as per the layout of famous XBEE module. Most of us will be having the boards or Arduino shields with XBEE socket built in, so it is not necessary to search for interfacing components or breakout boards ect. and no more loose connections. Just insert the BlueBEE in to the XBEE socket and you can transfer the required data using bluetooth instead of Zigbee interface.
This version of the BlueBEE uses the popular HC-05 module .These modems work as a serial (RX/TX) pipe. Any serial stream from 9600 to 460800 bpscan be passed seamlessly from your computer to your target.
It has two modes of operation, namely AT command mode and Data communication mode. In AT command mode, we can configure the different control parameters which finally determine the working of the module. In this mode we can’t communicate with other devices. In Data communication mode, the device works as per the settings previously defined by the user in AT command mode and can communicates with other devices.
Hardware Features:
This version of the BlueBEE uses the popular HC-05 module .These modems work as a serial (RX/TX) pipe. Any serial stream from 9600 to 460800 bpscan be passed seamlessly from your computer to your target.
It has two modes of operation, namely AT command mode and Data communication mode. In AT command mode, we can configure the different control parameters which finally determine the working of the module. In this mode we can’t communicate with other devices. In Data communication mode, the device works as per the settings previously defined by the user in AT command mode and can communicates with other devices.
Hardware Features:
- Typical -80dBm sensitivity
- Up to +4dBm RF transmit power
- Class 2 Bluetooth Radio Modem
- Onboard Status,Connection and Power LED
- Operating Voltage: 3.3V
- Builtin integrated antenna
- Speed:
- Asynchronous: 2.1Mbps(Max)/160 kbps
- Synchronous: 1Mbps/1Mbps
- Configured to Master/Slave by user.
- Security: Authentication and encryption
- Xbee compatible socket
- Default Baud rate: 38400, Data bits: 8, Stop bit: 1, Parity: No parity, Data control: has Supported baud rates: 9600, 19200, 38400, 57600, 115200, 230400 and 460800.
- Given a rising pulse in PIO0, device will be disconnected.
- Status instruction port PIO1: low-disconnected, high-connected.
- PIO8 and PIO9 can be connected to red and blue led separately. When master and slave are paired, red and blue led blinks 1time/2s in interval, while disconnected only blue led blinks 2times/s.
- Auto-connect to the last device on power as default.
- Permit pairing device to connect as default.
- Auto-pairing PINCODE: ”0000” as default
- Pairing PINCODE: ”1234”as default
