Menu
Your Cart

HC-05 Bluelink RS232 (rhydoLABZ)

HC-05 Bluelink RS232 (rhydoLABZ)
HC-05 Bluelink RS232 (rhydoLABZ)
HC-05 Bluelink RS232 (rhydoLABZ)
HC-05 Bluelink RS232 (rhydoLABZ)
HC-05 Bluelink RS232 (rhydoLABZ)
HC-05 Bluelink RS232 (rhydoLABZ)
HC-05 Bluelink RS232 (rhydoLABZ)
HC-05 Bluelink RS232 (rhydoLABZ)
HC-05 Bluelink RS232 (rhydoLABZ)
  • Stock: Out Of Stock
  • Brand: rhydoLABZ
  • Model: WRL-2512
  • Weight: 0.04kg
  • MPN: WRL-2512
Rs 499.00
(Excluding GST)
Description: HC-05 is a low cost, easy to use Bluetooth module which communicates using RS-232 protocol. The device becomes ready to use by plugging in the adaptor and serial cable.

It has two modes of operation, namely AT command mode and Data communication mode.In AT command mode, we can configure the different control parameters which finally determine the working of the module. In this mode we can’t communicate with other devices. In Data communication mode, the device works as per the settings previously defined by the user in AT command mode and can communicates with other devices.

Hardware Features:
  • User friendly operation
  • Typical -80dBm sensitivity
  • Belongs to Class 2 Bluetooth Catagory
  • Bluetooth v2.0+EDR
  • Up to +4dBm RF transmit power
  • 9V DC output adapter facility is possible
  • RMC connector for alternative power up
  • PIO control
  • Builtin integrated antenna
  • Comes with integrated DB9 female connector
  • Speed: Asynchronous: 2.1Mbps(Max) / 160 kbps, Synchronous: 1Mbps/1Mbps
  • Security: Authentication and encryption
  • Profiles: Bluetooth serial port
  • LED indication to know the connection status
Software Features:
  • Default Baud rate: 38400, Data bits:8, Stop bit:1,Parity:No parity.
  • Supported baud rates: 9600, 19200, 38400, 57600, 115200, 230400 and 460800.
  • Given a rising pulse in PIO0, device will be disconnected.
  • Status instruction port PIO1: low-disconnected, high-connected;
  • When master and slave are paired, red and blue led blinks 1time/2s in interval, while disconnected only blue led blinks 2times/s.
  • Auto-connect to the last device on power as default.
  • Permit pairing device to connect as default.
  • Auto-pairing PINCODE: ”0000” as default
  • Pairing PINCODE: ”1234”as default
Documents:

Write a review

Please login or register to review