Description: Yes, the same connecting cable for any development board. Use these cables to interface any computer with a standard RS232 Serial port to any of our boards. Cable color and shape may vary slightly from image as our stock rotates.
Features:
DB9 cable for RS232 s..
Description: The pcDuino AV Kit from Sparkfun includes everything you need to get your LinkSprite pcDuino powered, networked and connected to an HDMI enabled TV or monitor. If you don’t happen to have all of these cables laying around, this is the easiest way to get up and running with your pcDuino...
Description: Use these Female to Female cables to connect a serial printer to a 9-pin serial port, or transfer files from PC to PC via serial connection. Cable color and shape may vary slightly from image as our stock rotates. Designed to provide a reliable and long-lasting connection.
Feat..
Description: Passive Power Over Ethernet Cable is applicable for wide range of network products such as Access Points, Routers, IP cameras, modems, switches, embedded computers or other network devices. At the same time it's compatible with most devices available on the market. Passive PoE`s range i..
This connector cable interfaces UFL RF connectors to SMA antennas. Use it to attach any standard SMA antennas to the wireless modules.
Dimensions: 23cm Length
Features:
Frequency Range (MHz):2400-2500MHz
Input Impedance (Ω): 50
V.S.W.R≤1.2Gain (dBi):12dBiF/B Ratio≥15dB
Horizont..
This connector cable interfaces UFL RF connectors to SMA antennas. Use it to attach any standard SMA antennas to the wireless modules.
Dimensions: 12cm Length
Features:
Frequency Range (MHz):2400-2500MHz
Input Impedence (Ω): 50
V.S.W.R≤1.2Gain (dBi):12dBi
F/B Ratio≥15dB
Horizonta..
Description: This is a 9" servo extension cable. This comes in very handy when your servo is further away from the controller than the wire on the servo allows. Fits all Hitec, Futaba, JR, Multiplex, and Airtronics Z servos. Wire can also be used as a simple jumper cable.
Features:
Female to ..
Description: This is a 12" servo extension cable. This comes in very handy when your servo is further away from the controller than the wire on the servo allows. Male connector on one end goes to controller, female connector mates with servo. Fits all Hitec, Futaba, JR, Multiplex, and Airtronics Z s..
Description: This is a 12" servo cable. This comes in very handy when your servo is further away from the controller than the wire on the servo allows. Female connector on one end goes to controller and the female connector on the other mates with male pins commonly found on a controller board (such..
Description: This 6-inch (150-mm), twisted cable has 22-AWG wires and female “JR”-style connectors on both ends, the same kind of connector commonly found on RC hobby servos. It can be used to make connections between devices with 0.1" 3-pin male headers, such as between RC servo controllers or RC r..
This 24-inch (600-mm), flat cable can be used to extend the leads of many common RC hobby servos. It has 22-AWG wires, and both the male and female cable ends are compatible with both JR- and Futaba-style connectors, allowing it to work in either system or as an adapter between systems. The cable’s ..
Description: This 12-inch (300-mm), flat cable can be used to extend the leads of many common RC hobby servos. It has 22-AWG wires, and both the male and female cable ends are compatible with both JR- and Futaba-style connectors, allowing it to work in either system or as an adapter between systems...
Description: This is a long communication cable, 25 centimeters, that mates with the EM406, EM401, MTK and uBlox Adapter. Cut and hack this cable to your needs. The cable has two a 6-pin JST connectors with 1mm pitch. Wired pin 1 to pin 1.
Package includes:
1 x EM-406/uBlox/MTK Adapter Cable ..
Description: Once you've hacked everything, why not go out in the garage and hack your car? This cable allows you to access the pins on your car's OBDII connector. It has an OBDII connector on one end and a DB9 female serial connector on the other. The overall length of the cable is 5'.
..
Description: DB25 Parallel port extension cable. Use this cable to interface any computer with a standard Parallel (Printer) port to any of our boards or programmers.
Specification:
Male to Female
DB25 parallel port extension
Wired straight through
Package includes:
1 x D..