Metal Pushbutton - Momentary is a perfect choice if you are in need of a heavy duty push button! These metal push buttons are a very tough, small, panel-mount momentary switch with an illuminated blue LED ring. It is a SPDT with 16mm threading and 1mm pitch. This button is perfect for basic On/Off f..
Description: DIP switch with 4 individual switch positions. The pins have 0.1"(2.54mm) spacing - fits great into a breadboard! Works great as general control switches.
Features:
4 individual switch positions
2.54mm pin spacing
General control switches
Package includes:
1 ..
Description: DIP switch with 8 individual switch positions. The pins have .1"(2.54mm) spacing - fits great into a breadboard! Works great as general control switches.
Features:
8 individual switch positions
2.54mm pin spacing
General control switches
Package includes: ..
This is 12mm x 12mm thru hole tactile switch offers reliable dome contact technology with strong tactile/audible feedback. Its multiple operating force options allows it to be applied to many industries: telecommunications, consumer electronics, medical, testing/instrumentation, computer/servers/per..
Miniature Single Pole Single Throw switches with 5mm (Shaft Length from base) These . Perfect as a tactile reset switch. Mounts directly into standard bread boards. Rated up to 50mA.
Note: See resources for dimensional details
Features:
Shaft Length : 5mm
current rating : 50mA
..
Description: Miniature surface mount momentary button. These are great, low-profile momentary switches. Perfect as a tactile reset switch. Rated up to 50mA.
Specifications:
Rating : DC 12V, 50mA Max
Circuit : 1C-1P
Operating Force : 160±30gf,250±5gf
Contact Resistance : 100mΩ Max
..
Description: This is a translucent silicon rubber button pad with 16 buttons.
Each button has a hole underneath that accepts either a 3mm or 5mm
standard LED. The idea is that you can create a button interface of your
choice with the ability to display simple colors under each button.
Mainly..
Description: This a simple breakout board for the button pads. Each LED and button is brought out to the side connectors. The connectors are soldered to the back side of the PCB. We recommend trimming the connector leads on the button side as short as possible to reduce the deflection of the pad.Now..
Description: A basic 12 button keypad for user input. The buttons are setup in a matrix format. This allows a microcontroller to 'scan' the 7 output pins to see which of the 12 buttons is being pressed. Check the examples below for correct pin-outs and such.
Package Includes:
1x Keyp..
Description: This is a simple LED-illuminated tactile button with a green cap. It's just like a basic tactile button, but it lights up green! So now you can get visual feedback, or light up your project. These have a 12mm body and are rated for 50mA. They don't easily fit into a breadboard.
P..