Menu
Your Cart

Connectors/Sockets

Model: PRT-3322 Brand: Pololu - USA
The FPF1320 dual-input single-output power switch is a unique IC that switches a load between two power sources. It behaves as a power multiplexer (or mux), using a digital select signal to determine which of the two 1.5 V to 5.5 V input power rails to connect to the output, and can handle a maximum..
Rs 349.00
Model: PRT-3321 Brand: Pololu - USA
The USB Type-C connector is intended to supersede a wide range of existing USB connectors. It is reversible and can serve in both USB host and USB device roles, allowing either end of a cable to be plugged into a receptacle with either side up, and it can support negotiation of increased power (up t..
Rs 214.00
Model: ROB-3309 Brand: Pololu - USA
This board breaks out the VBUS, GND, D-, D+ and ID pins of a USB Mini-B connector. The VBUS and GND pins can be used to power your project from USB, while the D- and D+ pins give you access to the USB differential data signals. Each of these pins, along with the ID pin, are broken out into a 1×5 row..
Rs 149.00
Model: WRL-3744
A straight SMA female RF coaxial connector for SMA male RF antennas with a Characteristic impedance of 50Ω. They are widely used in connection with RF coaxial cable or the transmission of RF signal in the mobile communication system, GSM, GPRS, CDMA, LTE, GPS, GNSS, GLONASS, BeiDou corresponding to ..
Rs 22.00
Model: CON-2526
This Break away female header connector is a Single-row, 40-pin (1×40), straight female header strip designed to match  1.27 mm male header.These straight female header strips are commonly used as low-cost connectors for custom-made cables or perforated prototyping PCBs. The standard spacing is the ..
Rs 24.00
Model: CON-3138
Its the USB Type ‘A’ male SMD connector for to use with any PCB that will be used with a Type A to Type A USB cable. Package Includes: 1x USB Type ‘A’ male SMD connector Development Resource: Datasheet..
Rs 9.00
Model: COM-2480
This is a 18 pin IC Base with pins spaced at 0.1"(2.54 mm) .Use this IC base for easily plugging in and out ICs during prototyping. Also use this IC base to protect IC from damage due to heat while soldering by first soldering the base to the board and then plugging in the IC later. IC bases are als..
Rs 7.00
Model: CON-2381
These DB9 Male Solder Connectors are used to terminate the connection type of a cable. They can easily be soldered to a custom length cable as well as create a custom pinout, creating a permanent and durable connection for all applications. These connectors are made with high-quality materials to en..
Rs 6.00
Model: CON-3387 Brand: Waveshare
HDMI – VGA adapter cable from makes it possible to convert the digital output signal of an mini HDMI connection into an analogue signal for a VGA monitor input. The input signal is converted into the output signal 1:1 and in high quality. Only for use with: 7inch HDMI LCD (H) 10.1inch HDMI L..
Rs 349.00
Model: CON-3393
Jumper Wire Pin Female Gold Plated 2.54mm can be crimped on 22-28AWG wires and snapped into crimp connector housings to create custom cables that are compatible with standard 0.1"/ 2.54mm - pitch headers and solderless breadboards. Crimping these pins on wires can be a difficult and time-consuming p..
Rs 15.00
Model: CON-3389 Brand: Chineese
HDMI to VGA Adapter is that converts HDMI input into analog VGA, it provides a simple way to output high definition image to a VGA equipment. It’s useful for Raspberry Pi, Cubieboard, Cubietruck and so forth. Specifications of HDMI to VGA Adapter HDMI(Type A) to VGA(D-SUB) Color: White ..
Rs 269.00
Model: WRL-3147
PCB Edge Mountable - SMA-Female RF connector for 1.2mm Thick PCB. Perfect for prototyping with the GPS and Cellular devices that require an antenna connection. These connectors have a female signal pin and will correctly mate with the original SMA- Male type antennas. Features of SMA Female Conne..
Rs 49.00
Model: DEV-3601 Brand: Sparkfun - USA
SparkFun Level Shifting microSD Breakout allows to utilize a microSD card at Arduino’s SD library’s top speed on a 5V system. With the additional feature of being 3.0V to 5.0V tolerant for ease of use, discrete level shifting is no longer required. This breakout is also a bit unique in that it level..
Rs 399.00
Model: CON-2968
Micro-Sim Card Connector (8 Pin) is a push-push type micro SIM socket . It comes with top mount for SMT soldering. SIM card can be inserted and removed with smooth extraction function by push-push mechanism. This sim card connector comes with super low profile with 1.5mm height. Card mis insert..
Rs 28.00
Model: CON-3125 Brand: Sparkfun - USA
Raspberry Pi GPIO Tall Header - 2x20 has the same number and spacing of pins as a Raspberry Pi and provides your board with the ability to extend the heights of your GPIO to accommodate for enclosures or other parts that can encapsulate your Pi. This through-hole header has 40 0.1"-spaced pins and c..
Rs 149.00
Showing 16 to 30 of 94 (7 Pages)