Fio v3 - ATmega32U4 is a new spin on the Arduino Fio hardware powered by the ATmega32U4.Not only is it small and LiPo ready, it’s a very capable XBee ready development board.
The JST-connector and 3.3v system voltage make this a great development tool for portable devices, simply plug in a Li-Poly ..
Description: The Intel® Edison is an ultra small computing platform that will change the way you look at embedded electronics. Each Edison is packed with a huge amount of tech goodies into a tiny package while still providing the same robust strength of your go-to single board computer. Powered by t..
Description: The Beaglebone Black is a low-cost credit-card-sized development platform with good support from a fast growing community. The Beaglebone Black differs slightly from the regular version by providing you with an onboard micro HDMI port, 512MB of DDR3L DRAM, 4GB onboard flash memory, an A..
Description: This is the Teensy Audio board add-on for the Teensy 3.0 and 3.1 development boards. This audio board provides you with an easy-to-use tool to add high quality 16 bit, 44.1 kHz sample rate audio to your Teensy project. With the audio library provided in the Documents section below you w..
Description: The Intel® Galileo board is a microcontroller board based on the Intel® Quark SoC X1000 application processor, a 32-bit Intel® Pentium® brand system on a chip (SoC). It is the first board based on Intel® architecture designed to be hardware and software pin-compatible with shields desig..
Description:The Pololu A-Star 32U4 Micro is a general-purpose programmable module based on Atmel’s ATmega32U4 AVR microcontroller, which has 32 KB of flash program memory, 2.5 KB of RAM, and built-in USB functionality. Onboard features of the A-Star (abbreviated A*) include a 16 MHz resonator, a USB..
Description: Arch Pro is an mbed enabled development board for rapid prototyping. It's a variant of mbed LPC1768 with build-in Ethernet, USB Host/Device, Grove connectors and Arduino form factor. With a variety of Shield and Grove modules and lots of software libraries for Arch Pro, you can implemen..
Description: The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. The Teensy++ breaks out all of the IO available on the AT90USB1286 to breadboard-friendly 0.1" spaced headers so you can hook up a load of peripherals.The Teensy++ comes pre-flashed ..
Arduino Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU (datasheet). It is the first Arduino board based on a 32-bit ARM core microcontroller. It has 54 digital input/output pins (of which 12 can be used as PWM outputs), 12 analog inputs, 4 UARTs (hardware serial ports), ..
Description: This is the Development Platform for µOLED-XX-G1(SGC/GFX) Display Modules. The DEVBOARD-G1 is a compact and low-cost all in one development platform for the following display modules:4DGL Platform:µOLED-96-G1(GFX)µOLED-128-G1(GFX)µOLED-160-G1(GFX)Serial Platform:µOLED-96-G1(SGC)µ..
The mbed Microcontroller is an ARM processor, a comprehensive set of peripherals and a USB programming and communication interface provided in a small and practical DIP package. The mbed is a super-easy-to-use rapid prototyping tool built on industry standard technology.
The mbed Microcontroller ..
Description: This is a breakout board for the ATmega128RFA1. It includes an on board 3.3V regulator, chip antenna, and DC input jack. The board can be powered with either a 5V or a 9V wall wart. ATmega128RFA1 is an IEEE 802.15.4 compliant single-chip, combining the industry- leading AVR microcontrol..
Description: This is a PICAXE experimenter's kit including all the parts and widgets you need to get up and running with PICAXE programming. The development board comes fully assembled and includes an 18x1 PICAXE microcontroller. On top of that, this board is compatible with 8/18/28/40 pin PICAXE IC..
Description: This is the PICAXE-18X Starter Pack, a
simple kit that provides you with everything you need to get started
with 18-pin PICAXE controllers.The PICAXE is an easy-to-program microcontroller system that exploits
the unique characteristics of the new generation of low-cost flash
memory..
Description: Everything you need to get started with 8 pin PICAXE microcontrollers! This PICAXE-08M Starter Pack (AXE003U) is a self-assembly kit, based on the PICAXE-08M2 Microcontroller.The starter pack is targeted at schools and general educational purposes, but the open design also makes it very..