XBee Explorer Dongle - rhydoLABZ
- Stock: In Stock
- Brand: rhydoLABZ
- Model: INT-2020
- Weight: 0.05kg
- MPN: INT-2020
Rs 815.00
(Excluding GST)
This is rhydoLABZ make XBee Explorer board with USB A Type connector for the XBee line of products which can be used as Dongle - can avoid USB cable and LAPTOP friendly!!. The board is populated with high current LDO to support most of XBee modules including XBee Pro!. The XBee Explorer Dongle will help you to reduce lot of hassles normally facing to implement Xbee Network. We have also added two more LED's (SLEEP & Associate) apart from normal 4 LED. This help you to use latest versions XBee Modules as well. The module is self powered from USB Port itself, thanks to low dropout regulator.
After Power up the explorer Dongle board will create a virtual COM port in PC , and you can communicate with the module same as serial port devices. The Explorer board is built with FT232RL Chip from FTDI and drivers are available for Windows ,Linux and MAC.
This unit works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version. Plug the Xbee Module into the XBee Explorer Dongle , attach to the LAPTOP, and you will have direct access to the serial and programming pins on the XBee unit.
Features:
- USB A Type Connector
- Built in SMD fuse for protecting PC USB Port
- Powered from PC USB Port
- High Current (500ma) 3V3 Voltage Regulator for XBee/XBee PRO Module
- 5 Onboard Status LEDs (Associate,Sleep,Tx,Rx and RSSI)
- Onboard Power LED
- High qualty PTH PCB and made by Automatic Pick and Place Machine
- 1x XBee Explorer Dongle
- rhydoLABZ-wiki
- FTDI driver Installation
- XBee Explorer Dongle Schematic
- FT232RL Datasheet
- FTClean (for removing extraneous/old ports)
- FT232RL Drivers
- X-CTU Download