Menu
Your Cart

TB6612FNG Dual Motor Driver Carrier

TB6612FNG Dual Motor Driver Carrier
Out Of Stock
TB6612FNG Dual Motor Driver Carrier
  • Stock: Out Of Stock
  • Brand: Pololu - USA
  • Model: ROB-1706
  • Weight: 0.05kg
  • MPN: 713
Rs 399.00
(Excluding GST)
This tiny board is an easy way to use Toshiba’s TB6612FNG dual motor driver, which can independently control two bidirectional DC motors or one bipolar stepper motor. A recommended motor voltage of 4.5 – 13.5 V and peak current output of 3 A per channel (1 A continuous) make this a great motor driver for low-power motors.

The TB6612FNG is a great dual motor driver that is perfect for interfacing two small DC motorsto a microcontroller, and it can also be used to control a single bipolar stepper motor. The MOSFET-based H-bridges are much more efficient than the BJT-based H-bridges used in older drivers such as the L298N and Sanyo’s LB1836M, which allows more current to be delivered to the motors and less to be drawn from the logic supply . This little breakout board gives you direct access to all of the features of the TB6612FNG and adds power supply capacitors and reverse battery protection on the motor supply (note: there is no reverse protection on the Vcc connection).

In a typical application, power connections are made on one side of the board and control connections are made on the other. All of the control inputs are internally pulled low. Each of the two motor channels has two direction control pins and a speed control pin that accepts a PWM input with a frequency of up to 100 kHz. The STBY pin must be driven high to take the driver out of standby mode.

Features:
  • Dual-H-bridge motor driver: can drive two DC motors or one bipolar stepper motor
  • Built-in thermal shutdown circuit
  • Filtering capacitors on both supply lines
  • Reverse-power protection on the motor supply
Specifications:
  • Motor driver:  TB6612FNG
  • Motor channels:  2
  • Minimum operating voltage:  4.5 V
  • Maximum operating voltage:  13.5 V
  • Continuous output current per channel:  1 A
  • Peak output current per channel:  3 A
  • Continuous paralleled output current:  2 A
  • Maximum PWM frequency:  100 kHz
  • Minimum logic voltage:  2.7 V
  • Maximum logic voltage:  5.5 V
  • Reverse voltage protection?:  Y
Dimensions:
  • Size: 0.60" x 0.80"
Documents:

Write a review

Please login or register to review