Vl6180x Time-Of-Flight Dist Sensor Carrier W/ Voltage Regulator
- Stock: In Stock
- Brand: Pololu - USA
- Model: ROB-2639
- Weight: 0.02kg
- MPN: 2489
Rs 849.00
(Excluding GST)
Description: This sensor is a carrier/breakout board for ST’s VL6180X proximity and ambient light sensor, which measures distance with 1 mm resolution over a detection range of 0 cm to 10 cm or greater. The VL6180X uses time-of-flight measurements of infrared pulses to determine the range to a target object, allowing it to give accurate results independent of the target’s color and surface. Distance and ambient light level measurements can be read through a digital I²C interface. The board has a 2.8 V linear regulator and integrated level shifters that allow it to work over an input voltage range of 2.7 V to 5.5 V, and the 0.1″ pin spacing makes it easy to use with standard solderless breadboards and 0.1″ perfboards.
Specifications:
Specifications:
- Interface: I²C
- Minimum operating voltage: 2.7 V
- Maximum operating voltage: 5.5 V
- Measurement range: 0 mm to 100 mm (ranging)
- Supply current: 5mA
- Size: 0.5" × 0.7" × 0.085"
- Weight: 0.5 g
- 1x Vl6180x Time-Of-Flight Distance Sensor Carrier With Voltage Regulator
- 1x 7 strip of 0.1" header pins
- 1x 7 strip of 0.1" right-angle header pins
- VL6180X (datasheet) https://www.rhydolabz.com/documents/ VL6180X.pdf
- Schematic of VL6180X Time-of-Flight Distance Sensor Carrier
- VL6180X range and ambient light sensor quick setup guide
- VL6180X application note
- VL6180X library for Arduino
- Product Page
