EllipZo-Robotic Chassis
- Stock: In Stock
- Brand: rhydoLABZ
- Model: ROB-2582
- Weight: 0.50kg
- MPN: ROB-2582
Rs 1,999.00
(Excluding GST)
Description: The EllipZo-robotic chassis is a light weight, low cost, medium capacity multipurpose robotic chassis which provides a great opportunity for starters to give shape to their robotic ideas.
EllipZo is cut out of a 3mm acrylic sheet which provides a strong and rigid platform to buildrobotic chassis. It is designed with minimum number of parts considering ease of assembly. It quite simple that even a high school student can assemble it without much difficulty. EllipZo is cut out in such a way that it doesn’t have any sharp edges. This is to make sure that the chassis doesn’t get stuck at corners. It has two layers where the top layer holds the servo motor and bottom layer holds the DC motor and free wheel.
EllipZo has space to hold two 4xAAA cells on the bottom plate. Whereas the top plate has slots to hold a toggle switch which could be used to disconnect battery from the circuit while not in use. It also has random slots on top plate which is compatible with Arduino & most other development platform.
EllipZo is also capable of carrying a proximity sensors like SHARP IR or rhydoLABZ ECHO Ultrasonic on slots provided on the top plate. EllipZo also has an interesting feature that enables the user to attach the top plate either facing DC motor or the free wheel side enabling interchangeability of front and rear of the chassis.
EllipZo could be made even smarter by simply purchasing the add-on kits available at rhydoLABZ which gives access to more pan heads, array holds & spares which simply enhances the features of EllipZo.
Features:
EllipZo is cut out of a 3mm acrylic sheet which provides a strong and rigid platform to buildrobotic chassis. It is designed with minimum number of parts considering ease of assembly. It quite simple that even a high school student can assemble it without much difficulty. EllipZo is cut out in such a way that it doesn’t have any sharp edges. This is to make sure that the chassis doesn’t get stuck at corners. It has two layers where the top layer holds the servo motor and bottom layer holds the DC motor and free wheel.
EllipZo has space to hold two 4xAAA cells on the bottom plate. Whereas the top plate has slots to hold a toggle switch which could be used to disconnect battery from the circuit while not in use. It also has random slots on top plate which is compatible with Arduino & most other development platform.
EllipZo is also capable of carrying a proximity sensors like SHARP IR or rhydoLABZ ECHO Ultrasonic on slots provided on the top plate. EllipZo also has an interesting feature that enables the user to attach the top plate either facing DC motor or the free wheel side enabling interchangeability of front and rear of the chassis.
EllipZo could be made even smarter by simply purchasing the add-on kits available at rhydoLABZ which gives access to more pan heads, array holds & spares which simply enhances the features of EllipZo.
Features:
- Strong 3mm acrylic body parts
- Enormous space for add more necessary circuits
- Six Pan head slots are provided around the top and bottom chassis
- 30mm wide rubber wheel
- Kit include all necessary robotic parts
- Options for different types of sensors like Echo ultrasonic, pololu QTR Reflectance sensor arrays
- DC motor (100RPM BO1 Plastic Gear Motor)
- Operating Voltage 3V-12V DC
- RPM 100rpm
- No load Current 40-80 mA
- Output Torque : 4 Kg-cmWheel
- Wheel(RW002 Off Road Wheels 65mm X 30mm(Pair))
- 65mm diameter
- 30mm wide
- Rubber wheel on plastic hub
- Toggle Switch
- Double Pole Double Through
- Rated Current 3A
- Rated Voltage 50V
- Length: 190mm (excluding array hold)
- Width: 130mm
- Height: 75mm
- 1 x Top Chassis
- 1 x Bottom Chassis
- 4 x DC Motor Hold
- 2 x 4xAAA Battery Holder
- 1 x Toggle Switch
- 1 x Caster Ball Wheel
- 2 x 100RPM BO1 plastic geared motor
- 1 x Off Road Wheels 65mmx30mm (Pair)
- Stand offs
- 4 x M3 6mm HEX
- 10 x M3 25mm HEX
- Screws
- 4 x M3 35mm STAR HEAD
- 26 x M3 6mm STAR HEAD
- 3 x M3 12mm STAR HEAD
- 2 x M2 12mm STAR HEAD
- Nuts
- 4 x M3 2mm HEX
