RFM22-S2 Wireless Transceiver
- Stock: In Stock
- Brand: Hope-RF
- Model: WRL-1401
- Weight: 0.05kg
- MPN: RFM22-S2
Rs 844.00
(Excluding GST)
Description: The RFM22 is a low-cost ISM FSK transceiver module which offers communication at 434MHz and adjustable output power of up to +17 dBm. The wide operating voltage range of 1.8–3.6 V and low current consumption makes the RFM22 an ideal solution for battery powered applications.
Communication with the RFM22 is achieved via a standard 4-wire SPI interface. Three configurable general purpose I/Os are also available, the use of which can be tailored towards the needs of your project. A host of other features are also available including an 8-bit ADC, temperature sensor, RX and TX FIFOs, and low-battery detection. See the datasheet below for a complete description of every register and command.
Features:
Documents:
Communication with the RFM22 is achieved via a standard 4-wire SPI interface. Three configurable general purpose I/Os are also available, the use of which can be tailored towards the needs of your project. A host of other features are also available including an 8-bit ADC, temperature sensor, RX and TX FIFOs, and low-battery detection. See the datasheet below for a complete description of every register and command.
Features:
- Frequency Range: 434 MHz
- Sensitivity: -118 dBm
- +17 dBm Max Output Power (Configurable)
- Low Power Consumption
- Data Rate: 1 to 128 kbps
- Power Supply: 1.8 to 3.6 V
- Ultra low power shutdown mode
- Digital RSSI
- Wake-on-radio
- Auto-frequency calibration (AFC)
- Configurable packet structure
- Preamble detector
- TX and RX 64 byte FIFOs
- Low battery detector
- Temperature sensor and 8-bit ADC
- -40 to +85 °C temperature range
- Integrated voltage regulators
- Frequency hopping capability
- FSK, GFSK, and OOK modulation
- Low BOM
- Power-on-reset (POR)
Documents:
- Datasheet
- Hope RF’s RFM22 Product Page
- Example Code (ATmega328)
