3.2 inch 320X240 Primary Display For Raspberry Pi 4Dpi-32

The 4DPi-32 is a 3.2” 320x240 Primary Display for the Raspberry Pi, which plugs directly on top of a Raspberry Pi and displays the primary output which is normally sent to the HDMI or Composite output. It features an integrated Resistive Touch panel, enabling the 4DPi-32 to function with the Raspberry Pi without the need for a mouse.

Communication between the 4DPi-32 and the Raspberry Pi is interfaced with a high speed 48Mhz SPI connection, which utilizes an on-board processor for direct command interpretation and SPI communication compression, and features a customized DMA enabled kernel.

The 4DPi-32 is designed to work with the Raspbian Operating System running on the Raspberry Pi, as that is the official Raspberry Pi operating system.

The 4DPi-32 features a breakout header (P2), which enables all of the Raspberry Pi GPIO pins to be accessed while the 4DPi-32 is connected. These can be access with jumper wires or with an IDC ribbon cable.

Powered directly off the Raspberry Pi, this 3.2" Touch panel allows effortless connection, and a single download package will get you up and running with a few simple steps. Please refer to the Datasheet for detailed information.

NOTE: Compatible with the Raspberry Pi 2! Compatible with A, B, A+, B+, and Pi 2

Features:

• 3.2" 320x240 Resolution TFT LCD Display
• Primary Display for the Raspberry Pi
• Integrated Resistive Touch
• Fast interface with compression technology
• Capable of 25 FPS

Specifications:

• Universal 3.2” Primary Display for the Raspberry Pi.
• Compatible with Raspberry Pi A, B and B+ versions.
• 320x240 QVGA Resolution, RGB 65K true to life colours, TFT Screen with integrated 4-wire Resistive Touch Panel.
• Display full GUI output / primary output, just like a monitor connected to the Raspberry Pi
• High Speed 48Mhz SPI connection to the Raspberry Pi, featuring SPI compression technology.
• Powered directly off the Raspberry Pi, no external power supply is required.
• Typical frame rate of 25FPS. Higher if image is able to be compressed by Kernel.
• On/Off or PWM controlled backlight, selectable by on board jumper.
• Module dimensions: 57.2 x 92.2 x 21mm (including corner plates). Weighing ~ 50g.
• Display Viewing Area: 48.60 x 64.80mm
• 4x corner plates with 2.6mm holes for mechanical mounting.
• RoHS and CE Compliant.

Package Includes:

• 1x 4DPi-32 3.2" Display Module
• 1x Quick Start Guide

Documents:

• Module Documentation
  • 4DPi-32 Datasheet
• Software Packages
  • 4DPi-32 Package for Pi1's (A/B/A+/B+)
  • 4DPi-32 Package for Raspberry Pi2
  • 4DPi-32 Source Code