Pololu Micro Dual Serial Motor Controller w/Manual
- Stock: In Stock
- Brand: Pololu - USA
- Model: ROB-1413
- Weight: 0.10kg
- MPN: 411
Rs 1,986.00
(Excluding GST)
Description: This tiny module can control two motors, 1 A peak each, and you can daisy-chain multiple units to control up to 62 motors with a single serial line. Pololu’s popular micro motor controller will get your robot running in a snap. The tiny module can individually control two motors, and you can daisy-chain multiple units to control up to 62 motors with one serial line. The new version provides up to 2 A to a single motor, or 1 A each to two motors. The motor supply can be as low as 2 V, making the unit a perfect match for small DC motors.
Using one serial output from your microcontroller, you can independently set each motor to go forward or backward at any of 127 speeds, coast, and with the new version, brake. The micro motor controller is compatible with our serial servo controllers and serial motor controllers, so you can control an almost unlimited number of motors and servos with one serial line.
Specifications:
Using one serial output from your microcontroller, you can independently set each motor to go forward or backward at any of 127 speeds, coast, and with the new version, brake. The micro motor controller is compatible with our serial servo controllers and serial motor controllers, so you can control an almost unlimited number of motors and servos with one serial line.
Specifications:
- Motor driver: LB1836
- Motor channels: 2
- Control interface: non-inverted TTL serial
- Minimum operating voltage: 1.8 V
- Maximum operating voltage: 9 V
- Continuous output current per channel: 0.5 A
- Peak output current per channel: 1 A
- Maximum PWM frequency: 600 Hz (can be 750Hz when controlling only one motor)
- Minimum logic voltage: 2.5 V
- Maximum logic voltage: 5.5 V
- Reverse voltage protection?: N
- Size: 0.9" x 0.45"
- Weight: 1 g
