Pololu Dual G2 High-Power Motor Driver 24V14 For Pi (Assembled)

Dual G2 High-Power Motor Driver 24V14 are add-on boards for the Raspberry Pi, featuring pairs of discrete MOSFET H-bridges designed to drive two large brushed DC motors. They are designed to mount on and plug into compatible Raspberry Pi boards (Model B+ or newer), including the Pi 3 Model B and Model A+. Its twin discrete MOSFET H-bridges support a wide 6.5 V to 36 V operating range and are efficient enough to deliver a continuous 14 A without a heat sink. The drivers offer basic current limiting functionality, and they accept ultrasonic PWM frequencies for quieter operation. The default pin mappings make it easy to get started, but they can be customized for more specialized applications. This version ships fully assembled with connectors soldered in.

Features of Dual G2 High-Power Motor Driver 24V14

• Operating voltage: 6.5 V to 36 V
• Output current: 14 A continuous
• Active current limiting (chopping) with approximate default threshold of 40 A (can be adjusted lower)
• PWM operation up to 100 kHz
• Motor indicator LEDs show what the outputs are doing even when no motor is connected
• Integrated 5 V, 2.5 A switching step-down voltage regulator powers the Raspberry Pi base for single-supply operation
• Python library makes it easy to get started using this board as a motor driver expansion board
• GPIO pin mappings can be customized if the default mappings are not convenient
• Current sensing and limiting pins are exposed for advanced use
• Reverse-voltage protection
• Undervoltage shutdown
• Short circuit protection

Specifications of Dual G2 High-Power Motor Driver 24V14

• Motor channels: 2
• Minimum operating voltage: 6.5 V
• Maximum operating voltage: 36 V
• Continuous output current per channel: 14 A
• Maximum PWM frequency: 100 kHz

Package include:

• 1 x Pololu Dual G2 High-Power Motor Driver 24V14
• 2 x 2×20-pin 0.1″ female header
• 4 x M2.5 standoffs (11 mm length), screws, and nuts

Development resources:

• Product page
• Dimension
• 3D model of the Pololu Dual G2 High-Power Motor Driver 24v14 for Raspberry Pi