Description: HLK-2M05 Hi-link 5V 2W AC to DC Power Supply Module is plastic enclosed PCB mounted isolated switching step-down power supply module. It can supply 5V DC from 120V AC – 230V AC and has a power rating of 2W. This power supply module replaces lots of parts from the traditional power suppl..
Description : The ESP-12F, ESP8266 Wi-Fi Module is an integrated chip it can handle all the necessary overhead for communicating with our network, such as TCP/IP stack and 802.11 networks. It is completely addressable over SPI and UART protocols to connect our sensors or project directly to it throu..
Description: This shield Motor is based on the L298P, can be used to drive 2 DC motor or one 4-wire stepper and one 5v servos. The shield drives motors with digital pins D10, D11, D12, D13, and servo with digital pin D9. The Shield Motor is a full bridge double designed to drive inductive loads suc..
SIMCOM A7672- Series
LTE Cat 1 Modem
IoT/M2M-optimized
Overview
A7672S is the LTE CAT 1 module which supports wireless communication modes of LTE-FDD/GSM/GPRS/EDGE. It supports maximum 10Mbps downlink rate and 5Mbps uplinkrate. A7672S adopts LCC+LGA form facto..
Description: A7672S is the LTE Cat 1 module that supports wireless communication modes of LTE-FDD/GSM/GPRS/EDGE. A7672S supports maximum 10Mbps downlink rate and 5Mbps uplink rate. A7672S supports both multiple built-in network protocols and the drivers for main operation systems (U..
Description: A7672S-FASE is the LTE CAT 1 module which supports wireless communication modes of LTE-FDD/GSM/GPRS/EDGE. It supports maximum 10Mbps downlink rate and 5Mbps uplink rate. A7672S adopts LCC+LGA form factor and is compatible with SIM7000/SIM7070 series (NB/Cat M modules), and SIM800A/SIM80..
SIMCOM A7672S-FASE Series
LTE Cat 1 Modem with GNSS (GPS)
IoT/M2M-optimized
Overview
A7672S is the LTE CAT 1 module which supports wireless communication modes of LTE-FDD/GSM/GPRS/EDGE. It supports maximum 10Mbps downlink rate and 5Mbps uplinkrate. A7672S adopts LCC..
Description: ESP32-WROOM-32 MCU Module are powerful and generic Wi-Fi/BT/BLE MCU modules that target a wide variety of applications. The ESP32-WROOM-32 MCU Modules use the ESP32-D0WD chip at its core. This SoC features two CPU cores that can be individually controlled, and the CPU clock frequency is..
Overview
DIN rail ABS case for Raspberry Pi 4, large inner space, injection moduling
DIN rail ABS Case for Raspberry Pi 4
DIN rail mount support, ABS material, clear top window, large inner space
DIN Rail Mount Support
Injection Moduling ABS Body With Rail Mount Support, E..
Overview
ABS protection Case for Raspberry Pi Zero series, fits Zero / Zero 2 W
Designed for Raspberry Pi Zero series
Compatible with Zero / Zero W / Zero 2 W
for reference only, Raspberry Pi Zero is NOT included.
Precise Opening Design
Reversed GPIO slot and ope..
Overview
Industrial serial server, RS485 to RJ45 Ethernet, TCP/IP to serial, rail-mount support
Features :
This is a RS485 device data acquisitor / IoT gateway designed for industrial environment. It combines multi functions in one, including serial server, Modbus gateway, MQTT gateway, RS4..
Overview
UART Fingerprint Sensor (D)
Capacitive 360° Verification
Nail plate-sized, UART commands operation
Features:
Based on a high performance Cortex processor, combined with high-security commercial fingerprinting algorithm, the UART Fingerprint Sensor (D) features functionali..
Overview
DIN rail Aluminum Case for Raspberry Pi 4, with cooling fan and heatsinks
Comes with cooling fan and heatsinks
Industrial grade, DIN rail mount support
Industrial grade DIN rail mounting
DIN rail mount design, easy-to-use
for reference only, Raspberry Pi ..
Overview
TOF (time of flight) Laser Range Sensor (B), UART / I2C bus, long range
long range | short blind zone | stable/accurate/sensitive | indoor/outdoor
The TOF Laser Range Sensor (B) is a TOF-based (time of flight) laser ranging sensor with embedded MCU and ranging algorithm, w..