Hot
LPC2148 ARM Header Board - rhydoLABZ
- Stock: Out Of Stock
- Brand: rhydoLABZ
- Model: HEA-1103
- Weight: 0.10kg
- MPN: HEA-1103
Rs 1,799.00
(Excluding GST)
Description: The LPC2148 ARM Header Board is a Low Cost Board that can be used to quickly evaluate and demonstrate the capabilities of NXP LPC2148 (ARM7TDMI) microcontroller. The Header board is designed as DIP package with access to all Port pins for external connection.The LPC2148 ARM Header Board consists all basic components required to function the microcontroller. The board is populated with voltage regulators ,RTC crystal ,Main Crystal and necessary de-coupling capacitors. Simply give 5V to the header , it will starts to execute your code!
LPC2148 ARM Header Board Features:
LPC2148 ARM Header Board Features:
- Easy to use DIP Package
- Includes NXP LPC2148 Microcontroller with onchip USB Peripheral
- On Board Power LED Indicator
- On Board JTAG Jumper
- On Board 12 MHz Crystal Oscillator
- On Board 32.768 KHz Crystal for RTC
- On Board 3.3V Regulator
- On Board Power Supply de-Coupling Capacitors
- All Port Pins available at Berge Strip
- NXP LPC2148 with 12 MHz Crystal Oscillator (With Boot loader Software)
- High Performance 32-bit ARM7TDMI-S™ CPU
- 512 KB Programmable Flash Memory provides minimum of 10,000 erase/write cycles and 10 years of data-retention.
- 32 KB Data Memory (SRAM)
- In-System Programming/In-Application Programming (ISP/IAP) via on-chip boot loader software.
- Single Flash sector or full chip erase in 400 ms and programming of 256 bytes in 1 ms.
- Embedded ICE RT and Embedded Trace interfaces offer real-time debugging with the on- chip RealMonitor software and high-speed tracing of instruction execution.
- USB 2.0 Full-speed compliant device controller with 2 KB of endpoint RAM.
- Provides 8KB of on-chip RAM accessible to USB by DMA
- Two 10-bit ADCs provide a total of 14 analog inputs, with conversion times as low as 2.44 us per channel.
- Single 10-bit DAC provides variable analog output.
- Two 32-bit Timers/External event counters.
- Four Capture and four Compare channels.
- PWM unit with six output pins.
- Low power Real-time clock with independent power and dedicated 32 kHz clock input.
- Multiple serial interfaces including two UARTs, two Fast I2C (400 kbit/s), SPI™ and SSP with buffering and variable data length capabilities.
- Vectored interrupt controller with configurable priorities and vector addresses.
- Up to 45 of 5 V tolerant general purpose I/O pins.
- Up to nine edge or level sensitive external interrupt pins.
- 60 MHz maximum CPU clock available from programmable on-chip Phase-Locked Loop (PLL) with settling time of 100us.
- On-chip integrated oscillator operates with external crystal in range of 1 MHz to 25 MHz
- Power saving modes include Idle and Power-down.
- Individual enable/disable of peripheral functions.
- Processor wake-up from Power-down mode via external interrupt.
- Single power supply chip with Power-On Reset (POR) and Brown-Out Detection (BOD:
- CPU Operating Voltage range of 3.0 V to 3.6 V
- 1x LPC2148 ARM Header Board