Menu
Your Cart

ARM LPC2129 CAN Development Board - rhydoLABZ

ARM LPC2129  CAN Development Board - rhydoLABZ
ARM LPC2129  CAN Development Board - rhydoLABZ
ARM LPC2129  CAN Development Board - rhydoLABZ
ARM LPC2129  CAN Development Board - rhydoLABZ
ARM LPC2129  CAN Development Board - rhydoLABZ
ARM LPC2129  CAN Development Board - rhydoLABZ
ARM LPC2129  CAN Development Board - rhydoLABZ
ARM LPC2129  CAN Development Board - rhydoLABZ
ARM LPC2129 CAN Development Board - rhydoLABZ
This product qualifies for free shipping
Exciting news! Orders over 1999/- now get free shipping. Happy shopping with complimentary shipping!
  • Stock: In Stock
  • Brand: rhydoLABZ
  • Model: DEV-1124
  • Weight: 1.00kg
  • MPN: DEV-1124
Rs 5,999.00
(Excluding GST)
Description: The eCee LPC2129 Development Board can be used to evaluate and demonstrate the capabilities of NXP LPC2129 microcontrollers. The board is designed for general purpose applications and includes a variety of hardware to exercise microcontroller peripherals. Ideally suitable for training and development purposes.
 

eCee LPC2129 Development Board Features

  • Includes Base board + Header Board
  • Compact and Ready to use design
  • Professional EMI/RFI Complaint PCB Layout Design for Noise Reduction
  • High Quality Two layer PTH PCB

Base Board Features

  • Supports LPC2132/38/48  Header Boards
  • Includes LPC2129 Header Board with in-built CAN Module
  • No separate programmer required (On-Chip Boot loader)
  • No Separate power adapter required (USB power source)
  • Two RS-232 Interfaces (For direct connection to PC’s Serial port)
  • On Board Two Line LCD Display (2x16) (with jumper select option)
  • On Board 8 LED Interface to test Port pin (with jumper select option)
  • On Board Pot interface to ADC
  • On Board Temperature Sensor Interface
  • On Board Buzzer Interface
  • On Board 4x4 (16 Keys) Matrix Keyboard
  • On Board I2C EEPROM
  • On Board External Interrupt Button
  • On Board Connector for PWM Output
  • PWM controlled LCD backlight        
  • On Board Connector for AnalogOutput
  • On Board Speaker Output
  • LF Amplifier LM 386 
  • Adaptor (any standard 9-12V power supply) option
  • On Board Power LED Indicator
  • On Board Reset button
  • All Port Pins available at Berg Strip
  • On Board JTAG Connector for Debugging/Programming
  • Power Supply Reverse Polarity Protection
  • Three On Board DB9 Connectors (Two for UART and One for CAN)
  • On Board USB Connector
  • On Board 1 Amp Voltage Regulator
  • On Board Connector for regulated 3V3 output
  • On Board Connector for regulated 5V output
  • Controller Area Network (CAN) transceiver 
  • Can be used as main board for developing applications

Header Board Features

  • Easy to use DIP Package
  • Includes NXP LPC 2129 Microcontroller with in-built CAN Module
  • On Board Power LED Indicator
  • On Board JTAG Jumper
  • On Board 10 MHz Crystal Oscillator
  • On Board 3.3V Regulator
  • On Board 1.8V Regulator
  • On Board Power Supply de-coupling Capacitors
  • All Port Pins available at Berg Strip
  • Header Module can be removed for developing your circuit

LPC 2129 Chip Specification

  • NXP LPC 2129 with 10 MHz Crystal Oscillator (With Boot loader Software)
  • High Performance 32-bit ARM7TDMI-S™ CPU
  • 256 KB Programmable Flash Memory provides a minimum of 100,000 erase/write cycles and 20 years of data retention.
  • 16 KB Data Memory (SRAM)
  • In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software.
  • Flash programming takes 1 ms per 512 byte line. Single sector or full chip erase takes 400ms.
  • Embedded ICE-RT interface enables breakpoints and watch points.
  • Two interconnected CAN interfaces with advanced acceptance  filters
  • Four channel 10-bit A/D converter with conversion time as low as 2.44 us.
  • Multiple serial interfaces including two UARTs , Fast I2C (400 kbits/s) and two zPIs
  • 60MHz maximum CPU clock available from programmable on-chip Phase-Locked Loop
  • Vectored Interrupt Controller with configurable priorities
  • Two 32-bit Timers.
  • Four Capture and four Compare channels.
  • PWM unit with six output pins.
  • Watch Dog Timer
  • Up to forty-six 5V tolerant general purpose I/O pins.
  • Up to nine edge or level sensitive external interrupt pins.
  • On-chip crystal oscillator with an operating range of 1MHz to 30MHz.
  • Two low power modes -  Idle and Power-down.
  • Processor wake-up from Power-down mode via external interrupt.
  • Individual enable/disable of peripheral functions for power optimization.
  • CPU operating voltage range of 1.65V to 1.95V and I/O power supply range of 3.0V to 3.6V

eCee LPC2129 Package Includes

Downloads

Write a review

Please login or register to review