CP2102 Basic (5V/3V3)
- Stock: In Stock
- Brand: rhydoLABZ
- Model: INT-2562
- Weight: 0.03kg
- MPN: INT-2562
Rs 399.00
(Excluding GST)
CP2102 Basic (5V/3V3)
We also recommend
The SX1509 Breakout is a 16-channel GPIO expander with an I2C interface – that means with just two wires, your microcontroller can interface with 16 f..
Rs 579.00
37 in 1 Sensor Kit for the Arduino system contains 37 individual modules which can be used to create many interesting experiments using the Arduino, A..
Rs 999.00
4Inch Tft Touch Shield For Arduino is a 320x480 resolution, integrate controller on board. It uses SPI interface and can be used to display image, tex..
Rs 2,499.00
This is a 40 pin stackable header perfect for making your own multiple Arduino Shield. You can easily cut this header pins with a normal cutter as per..
Rs 59.00
Description: This is a 6-pin female header, with extra long legs -- great for stacking Arduino shields.
Pins are spaced by 0.1".
Documents:
Datas..
Rs 18.00
From the same brand
This is a low cost SSOP to DIP Adapter (up to 28 pins) to convert the SSOP pins standard of 0.1" which is normally use in breadboards and donut boards..
Rs 40.00
SIMCOM A7672- Series
LTE Cat 1 Modem
IoT/M2M-optimized
Overview
A7672S is the LTE CAT 1 module which supports ..
Rs 1,999.00
SIMCOM A7672S-FASE Series
LTE Cat 1 Modem with GNSS (GPS)
IoT/M2M-optimized
Overview
A7672S is the LTE CAT 1 module ..
Rs 2,499.00
-25 %
Description: The Stick Series quick start boards from rhydoLABZ are primarily intended to be used as a development system for 64-pin ARM Controll..
Rs 2,999.00 Rs 3,999.00
Description: The Stick Series quick start boards from rhydoLABZ are primarily intended to be used as a development system for 64-pin ARM Controll..
Rs 2,999.00