Menu
Your Cart

Lumenati 90R - SparkFun USA

Lumenati 90R - SparkFun USA
Lumenati 90R - SparkFun USA
Lumenati 90R - SparkFun USA
Lumenati 90R - SparkFun USA
Lumenati 90R - SparkFun USA
Lumenati 90R - SparkFun USA
Lumenati 90R - SparkFun USA
  • Stock: In Stock
  • Brand: Sparkfun - USA
  • Model: DIS-3303
  • Weight: 0.02kg
  • MPN: COM-14358
Rs 359.00
(Excluding GST)

SparkFun Lumenati 90R is a small quarter-circle board equipped with three APA102C LEDs and a single mounting position. The 90R board has been specifically designed to be daisy-chained with other Lumenati boards. The APA102C LEDs on each board with numbers indicating their position in the sequence to write code more easily. The Lumenati 90R gets its name from the 90° angle it takes and the direction the signal and power flow. Combining four of the 90R boards creates a 12-LED ring with enough space in the center for a Lumenati 8-pack board. To create more than a small ring, need to solder on 8-stick boards to the 90R to create outlines of different shapes and sizes.

The APA102C addressable LEDs operate on +5V power input, as well as 0–5V logic levels for clock and data, and employ a 2-wire communication protocol consisting of a clock line and a data line. While this requires one more wire than standard WS2812B LEDs, the advantage is that the communication with the LEDs becomes somewhat timing-independent, allowing you to run these directly off of a Raspberry Pi or other single-board computer that doesn’t normally allow for a long, precisely timed data stream without the use of additional hardware.

Note: There are two solder jumpers on the back of the 90R labeled CO and DO (clock out and data out) that can be cut to interrupt those signals in case you make a closed-loop design where you don’t want the clock and data from your last LED to interfere with the clock and data to your first. It is critical that you cut the traces in the jumpers of the last board in the loop before you power up your LEDs if you’ve put together a continuous loop of Lumenati boards. Otherwise, it is likely that you’ll burn out a couple of LEDs.

Features of SparkFun Lumenati 90R
 

  • LEDs employ a 2-wire communication protocol
  • Operating voltage +5V
  • Operating temperature : -40 °C to +70 °C

Package includes:
 

  • 1 x SparkFun Lumenati 90R

Dimensions:
 

  • 35.7mm x 17.7mm x 3.2mm (1.4" x 0.7" x 0.12")

Development Resources:
 

 

Write a review

Please login or register to review