AVR ATmega16 Development Board - rhydoLABZ
This product qualifies for free shipping
Exciting news! Orders over 1999/- now get free shipping. Happy shopping with complimentary shipping!
- Stock: In Stock
- Brand: rhydoLABZ
- Model: DEV-1127
- Weight: 1.00kg
- MPN: DEV-1127
Rs 3,072.00
(Excluding GST)
Description: The eCee AVR ATMega16 Development Board can be used to evaluate and demonstrate the capabilities of AVR ATMega16 microcontroller. The MCU socket on board provides support for 40 pin DIP package of AVR ATMega16 controller. The board is designed for general purpose applications and includes a variety of hardware to exercise microcontroller peripherals. It is a fantastic tool for code debugging, development and prototyping. The all new board design have made it much more user-friendly than its predecessors, ideally suitable for training and development purposes. The components used in this board are of high quality and the PCB is high quality two layer PTH PCB, which makes this board especially durable. When you start using the eCee AVR ATMega16 Development Board you will find it to be one of the best development tool available for AVR ATMega16 controller. Here below you will find the key features of this product.
eCee AVR ATMega16 Features
- Compact and Ready to use design
- Professional EMI/RFI Complaint PCB Layout Design for Noise Reduction
- High Quality Two layer PTH PCB
- Includes AT MEGA16 Microcontroller
- Board Supports AVR AT MEGA32AT MEGA8535 Microcontrollers
- No separate programmer required (Built in Boot loader)
- No Separate power adapter required (USB power source)
- Screw terminal for External power Supply (with Jumper Select Option)
- External Power Supply range of 7V to 20V
- Adaptor (any standard 9-12V power supply) option
- RS-232 Interface (For direct connection to PC’s serial port)
- On board Two Line LCD Display (2x16)
- On board I2C EEPROM (4K-AT24C04)
- On board I2C RTC (DS 1307) with Crystal and Battery
- Four multiplexed 7-Segment LED Display
- Built in Matrix keyboard (12 keys)
- Built in Pull-Up (4 Keys) Keyboard
- Built in IR Sensor Interface – TSOP 1738
- Built in 8 LED Interface to test I/O
- On Board External Interrupt and Reset buttons
- Built in Potentiometer interface to ADC
- On Board Temperature Sensor Interface (LM35)
- On Board Buzzer Interface
- On Board PWM Output pin
- On Board JTAG Connector for Debugging/Programming
- On Board ISP Connector
- On Board 16 MHz Crystal Oscillator
- On Board Power LED Indicator
- On Board DB9 Connector
- On Board USB Connector
- All Port Pins available at IDC (2x5) Connector
- Can be used as main board for developing applications
- Power Supply Reverse Polarity Protection
- On Board 1 Amp Voltage Regulator
- Demo HEX codes included for testing of board features
- Example codes included
AVR ATMega16 Chip Specification
- Atmel AVR AT Mega16 with 16 MHz Crystal Oscillator (With Boot loader Software)
- 16 K bytes programmable flash
- 1 K bytes SRAM
- 512 bytes EEPROM
- 16 MHz operation (Up to 16 MIPS)
- 32 I/O pins
- 8 channel 10 bit ADC
- 4 PWM Channels
- Two 8-Bit Timer/Counter
- One 16-Bit Timer/Counter
- One Serial USART
- 1 Two Wire Serial Interface TWI
- SPI Master/ Slave
- Power Consumption
- 14 mA
- Operating voltage
- 2.7-5.5V for ATmega16L
- 4.5-5.5 for ATmega16
eCee AVR ATMega16 Package Includes
- Fully Assembled and Tested eCee AVRMega16 Development board
- 1x RS232 Serial Cable
- 1x USB Cable A to B
- 9x Jumpers
- 1x Coin Cell Battery
- 4x Spacer
- 8x Screw
- Software CDROM with
- Schematic
- Programming Software
- Sample Hex Code
- Example Codes
Downloads
- *User Manual
- Datasheets
- Schematic Diagram
- Softwares
Tags:
AVR
, ATmega16
, microcontroller
, ATmega32
, ATMEGA8535
, I2C
, RTC
, PWM
, JTAG
, ADC
, ATmega32AT