Your Cart

ARM LPC2148 Quick Start Board

ARM LPC2148 Quick Start Board
ARM LPC2148 Quick Start Board
ARM LPC2148 Quick Start Board
ARM LPC2148 Quick Start Board
ARM LPC2148 Quick Start Board
ARM LPC2148 Quick Start Board
ARM LPC2148 Quick Start Board
ARM LPC2148 Quick Start Board
ARM LPC2148 Quick Start Board
  • Stock: Out Of Stock
  • Brand: rhydoLABZ
  • Model: QSB-1101
  • Weight: 0.50kg
  • MPN: QSB-1101
Rs 1,825.00
(Excluding GST)
Description: The ARM LPC2148 Quick Start Board is a Low Cost ARM Development Board with USB peripherals that can be used to quickly evaluate and demonstrate the capabilities of  NXP LPC2148 (ARM7TDMI) microcontroller. The QsLPC2148 board is designed to work as a Project board with access to all Port pins for external connection. The ARM LPC2148 Quick Start Board  consists of a base board and a header board with microcontroller. The ARM Development board is populated with optimum components and is  ideally suitable for Students as well as professionals.

ARM LPC2148 Base Board Features:

  • Compact and Ready to use design
  • Professional  EMI/RFI Complaint PCB Layout Design for Noise Reduction
  • High Quality Two layer PTH PCB
  • Supports ARM LPC2129*/32*/38* Header Boards
  • Includes ARM LPC2148 (with onchip USB Peripheral) Header Board
  • No separate programmer required (On-Chip Boot loader)
  • No Separate power adapter required (USB power source)
  • Screw terminal for External power Supply
  • Power Supply range of 7V to 20V
  • RS-232 Interface for direct connection to PC’s serial port (COM 0)
  • On Board RS 232 to TTL Converter (COM 1)
  • On Board Power LED Indicator
  • On Board LED Connected via Jumper to I/O pin
  • On Board Reset button
  • All Port Pins available at Berge Strip and at Round Machine-cut female connector
  • On Board ARM JTAG Connector for Debugging/Programming
  • Can be used as header board for developing applications
  • Power Supply Reverse Polarity Protection
  • On Board 1 Amp Voltage Regulator
  • On Board Connector for regulated 3V3 output

ARM LPC2148 Header Board Features:

  • Easy to use DIP Package
  • Includes ARM LPC 2148 Microcontroller with onchip USB Peripheral
  • On Board Power LED Indicator
  • On Board JTAG Jumper
  • On Board 12 MHz Crystal Oscillator
  • On Board 32.768 KHz Crystal for RTC
  • On Board 3.3V Regulator
  • On Board Power Supply de-Coupling Capacitors
  • All Port Pins available at Berge Strip
  • Header Module can be removed for developing your circuit

ARM LPC 2148 Chip Specification:

  • NXP LPC 2148 with 12MHz Crystal Oscillator (With Boot loader Software)
  • High Performance 32-bit ARM7TDMI-S™ CPU
  • 512 KB Programmable Flash Memory provides minimum of 10,000 erase/write cycles and 10 years of data-retention.
  • 32 KB Data Memory (SRAM)
  • In-System Programming/In-Application Programming (ISP/IAP) via on-chip boot loader software.
  • Single Flash sector or full chip erase in 400 ms and programming of 256 bytes in 1 ms.
  • Embedded ICE RT and Embedded Trace interfaces offer real-time debugging with the on-   chip RealMonitor software and high-speed tracing of instruction execution.
  • USB 2.0 Full-speed compliant device controller with 2 KB of endpoint RAM.
  • Provides 8KB of on-chip RAM accessible to USB by DMA
  • Two 10-bit ADCs provide a total of 14 analog inputs, with conversion times as low as 2.44 us per  channel.
  • Single 10-bit DAC provides variable analog output.
  • Two 32-bit Timers/External event counters.
  • Four Capture and four Compare channels.
  • PWM unit with six output pins.
  • Low power Real-time clock with independent power and dedicated 32 kHz clock input.
  • Multiple serial interfaces including two UARTs, two Fast I2C (400 kbit/s), SPI™ and SSP with buffering and variable data length capabilities.
  • Vectored interrupt controller with configurable priorities and vector addresses.
  • Up to 45 of 5 V tolerant general purpose I/O pins.
  • Up to nine edge or level sensitive external interrupt pins.
  • 60 MHz maximum CPU clock available from programmable on-chip Phase-Locked Loop (PLL) with settling time of 100us.
  • On-chip integrated oscillator operates with external crystal in range of 1 MHz to 25 MHz
  • Power saving modes include Idle and Power-down.
  • Individual enable/disable of peripheral functions.
  • Processor wake-up from Power-down mode via external interrupt.
  • Single power supply chip with Power-On Reset (POR) and Brown-Out Detection (BOD:
  • CPU Operating Voltage range of 3.0 V to 3.6 V 

Package Includes:

  • 1x Fully Assembled and Tested ARM LPC2148 Quick Start Board
  • 1x LPC2148 USB2.0 ARM7TDMI
  • 1x RS232 Serial Cable
  • 1x USB cable ( To Power The Board )
  • 5x Jumpers - 2mm
  • 4x Spacers
  • 8x Screws
  • 1x 2 Pin RMC Female connector with wire (2mm pitch)
  • 1x Software CDROM with
    • User Manual
    • Schematic
    • Programming Software
    • Sample Hex Code
    • Example Codes
    • Datasheet
    • Development Environment (IDE)-Evaluation Version
    • C Compiler (Evaluation Version)


Write a review

Please login or register to review