Arduino Uno Wi-Fi( Orginal Board from Arduino)

Description : Arduino Uno Wi-Fi is the new Arduino Uno with an integrated Wi-Fi module. The board is based on the ATmega328P with an ESP8266 Wi-Fi Module integrated. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started. The ESP8266 Wi-Fi Module is a self contained SoC with integrated TCP/IP protocol stack that can give access to your Wi-Fi network. (Or the device can act as an access point.) One useful feature of Uno Wi-Fi is support for OTA (over-the-air) programming, either for transfer of Arduino sketches or Wi-Fi firmware.

Note: This is 100% GENUINE ARDUINO board.

• Digital I/O Pins: 20
• PWM Output: 6
• Power Consumption: 93 mA
• PCB Size: 53 x 68.5 mm

• Processor:ESP8266
• Architecture:Tensilica Xtensa LX106
• Operating Voltage:3.3 V
• Flash Memory:4 MB
• RAM:8 MB instruction, 12 MB data
• Clock Speed:80 MHz
• WiFi:802.11 b/g/n 2.4 GHz
• Wake up time:< 2 ms

• Microcontroller:ATmega328
• Architecture: Atmel AVR 8-bit
• Operating Voltage:5 V
• Flash memory: 32 KB
• SRAM: 2 KB
• Clock Speed: 16 MHz
• Analog I/O Pins: 6
• EEPROM: 1 KB
• DC Current per I/O Pins: 40 mA

• Product Page