Menu
Your Cart

4 Channel Capacitive Touch Module - TTP224

4 Channel Capacitive Touch Module - TTP224
4 Channel Capacitive Touch Module - TTP224
4 Channel Capacitive Touch Module - TTP224
4 Channel Capacitive Touch Module - TTP224
4 Channel Capacitive Touch Module - TTP224
4 Channel Capacitive Touch Module - TTP224
4 Channel Capacitive Touch Module - TTP224
  • Stock: In Stock
  • Brand: Chineese
  • Model: SEN-2814
  • Weight: 0.04kg
Rs 323.00
(Excluding GST)

4 Channel Capacitive Touch Module uses the touch-sensing IC TTP224 to sense the touch input. The module has 4 touch pads. Power the module with 2.4 ~ 5.5V DC and the touch pad is all active to sense the input.

Four Channel Capacitive Touch Module is easy to interface. It can be used along with a microcontroller or an arduino or even without one. When a capacitive load (such as a human hand) is in close proximity to the sense-pad, the sensor detects the change in capacitance and activates the switch. Custom sense-pads can be made from nearly any conductive material and these sensors can detect touch through thin layers of non-conductive materials such as glass, plastic, fabric or even wood.

Thus, the 4 Channel Capacitive Touch Module can be hidden in wall or other places, a perfect alternative to get rid of the conventional push-button troubles. A total of 4 pads are available on this module. The sense-pads can also be extended with a wire or almost any conductive material.

4 Channel Capacitive Touch Module Specification:

  • Onboard TTP224 capacitive touch sensor IC
  • 4 board-level status indicator
  • Working voltage: 2.4V - 5.5V
  • Advanced Pins breakout, so that the output mode and working mode selectable.
  • Low power selection
  • PCB board size: 35 (mm) x 29 (mm)

Resources:

Write a review

Please login or register to review