Menu
Your Cart

1000:1 Micro Metal Gearmotor HPCB 12V with Extended Motor Shaft

1000:1 Micro Metal Gearmotor HPCB 12V with Extended Motor Shaft
1000:1 Micro Metal Gearmotor HPCB 12V with Extended Motor Shaft
1000:1 Micro Metal Gearmotor HPCB 12V with Extended Motor Shaft
1000:1 Micro Metal Gearmotor HPCB 12V with Extended Motor Shaft
1000:1 Micro Metal Gearmotor HPCB 12V with Extended Motor Shaft
1000:1 Micro Metal Gearmotor HPCB 12V with Extended Motor Shaft
1000:1 Micro Metal Gearmotor HPCB 12V with Extended Motor Shaft
1000:1 Micro Metal Gearmotor HPCB 12V with Extended Motor Shaft
1000:1 Micro Metal Gearmotor HPCB 12V with Extended Motor Shaft
This product qualifies for free shipping
Exciting news! Orders over 1999/- now get free shipping. Happy shopping with complimentary shipping!
  • Stock: In Stock
  • Brand: Pololu - USA
  • Model: MOT-3229
  • Weight: 0.65kg
  • MPN: 3057
Rs 2,009.00
(Excluding GST)

This gearmotor is a miniature high-power, 12 V brushed DC motor with long-life carbon brushes and a 986.41:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.

These tiny brushed DC gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—and with five different motors. high-power 6 V and 12 V motors with long-life carbon brushes (HPCB), and high-power (HP), medium power (MP), and low power (LP) 6 V motors with shorter-life precious metal brushes. The 6 V and 12 V HPCB motors offer the same performance at their respective nominal voltages, just with the 12 V motor drawing half the current of the 6 V motor. The 6 V HPCB and 6 V HP motors are identical except for their brushes, which only affect the lifetime of the motor.
The HPCB versions can be differentiated from versions with precious metal brushes by their copper-colored terminals. Note that the HPCB terminals are 0.5 mm wider than those on the other micro metal gearmotor versions (2 mm vs. 1.5 mm), and they are about 1 mm closer together (6 mm vs. 7 mm).

Specifications:

  • Gear ratio:    986.41:1
  • No-load speed @ 12V:    35 rpm
  • No-load current @ 12V:    0.06 A
  • Stall current @ 12V:    0.75 A
  • Stall torque @ 12V:    10 kg·cm
  • No-load speed @ 6V:    18 rpm
  • No-load current @ 6V:    0.05 A
  • Stall current @ 6V:    0.38 A
  • Stall torque @ 6V:    5 kg·cm
  • Extended motor shaft:    YES
  • Long-life carbon brushes:    YES
  • Motor type:    0.75A stall @ 12V (HPCB 12V - carbon brush)

Performance at maximum efficiency:

  • Max efficiency @ 12V:    25 %
  • Speed at max efficiency:    27 rpm
  • Torque at max efficiency:    2.1 kg·cm
  • Current at max efficiency:    0.19 A
  • Output power at max efficiency:    0.59 W


Package Includes:

  • 1x 1000:1 Micro Metal Gearmotor with Extended Motor Shaft

Documents / Downloads:

 

Note:

  • Motor Accessories shown in images are for illustraion purpose only, not included in package.
  • Stall torque and current specifications are theoretical values, stalling the motor will damage the gearbox.
  • Stalling or overloading gearmotors can greatly decrease their lifetimes and even result in immediate damage. The recommended upper limit for instantaneous torque is 2.5 kg-cm (35 oz-in) for the 380:1 and 1000:1 gearboxes, and 2 kg-cm (25 oz-in) for all the other gear ratios. Strongly advise keeping applied loads well under this limit. Stalls can also result in rapid (potentially on the order of seconds) thermal damage to the motor windings and brushes, especially for the versions that use high-power (HP and HPCB) motors. a general recommendation for brushed DC motor operation is 25% or less of the stall current.

Write a review

Please login or register to review