1.14 inch LCD Display Module , 240×135 (Waveshare)

• 240×135, General 1.14inch LCD Display Module, IPS, 65K RGB
• embedded ST7789 driver, using SPI bus
• Comes with examples for Raspberry Pi, Arduino, STM32, etc

Features at a glance:

• 240×135 resolution, 65K RGB colors, clear and colorful displaying effect
• SPI interface, minimizes required IO pins, supports controller boards like Raspberry Pi/Arduino/STM32
• Comes with development resources (examples for Raspberry Pi/Arduino/STM32)

Specifications:

• Operating voltage - 3.3V/5V    
• Resolution - 240 × 135 pixels
• Communication Interface - 4-wire SPI  
•  Display size - 24.91 × 14.86mm
• Display Panel - IPS    
• Pixel size - 0.1101 × 0.1035mm
• Driver - ST7789    
• Dimensions - 35.00 × 32.00mm

                                                              Controlled via SPI Bus

                                    Supports controller boards like Raspberry Pi/Arduino/STM32

• VCC : Power (3.3V/5V input)
• GND : Ground
• DIN   : SPI data input
• CLK  : SPI clock input
• CS    : Chip selection, low active
• DC    : Data/Command selection (high for data, low for command)
• RST  : Reset, low active
• BL     : Backlight

                                                         Hardware connection

                                                         connecting with Raspberry Pi

                                                       Connecting with Arduino board

                                                     Living Example

                                                         Outline Dimensions

Package Includes:

• 1.14inch LCD Module x1
• PH2.0 8PIN 20cm cable x1

Downloads:

• Wiki (More Details)

Note: The 0.96inch OLED consists of 1/4 yellow upper section and 3/4 blue lower section, not a regular dual-color display.