XBee Explorer Regulated with 3v3 to 5V Converter (rhydoLABZ)

XBee Explorer Regulated with 3v3 to 5V Converter, from rhydoLABZ, takes care of the 3.3V regulation, 3V3 <-> 5V level conversion,  signal conditioning, and basic activity indicators (Power, RSSI and DIN/DOUT activity LEDs). It translates the 5V signals to 3.3V and vice versa, so that you can interface a 5V Micros to any XBee module. All XBee pins are brought out at 2.54mm bergstrip to ease breadboard usage.

This unit works with all XBee modules including the Series 1 and Series 2.5, standard and Pro versions. Plug an XBee into this breakout and you will have direct access to the serial and programming pins on the XBee unit and will be able to power the XBee with 5V.

This board comes fully populated with 3.3V regulator, XBee socket, four status LEDs, and level converter 3V3<->5V to communicate safely with the 3.3V XBees.

XBee Explorer Regulated with 3v3 to 5V Converter Features:

• Compatible with all XBee modules (Series 1 and Series 2.5, standard and Pro)
• Built in 3V3 Voltage regulator
• Onboard 3V3 <->5V level converter (easy to interface 5V Micros)
• Status LEDs ( RX,TX,RSSI,Power)
• XBee Pins available at 2.54mm bergstrip

XBee Explorer Regulated with 3v3 to 5V Converter Package:

• 1 x XBee Explorer Regulated with 3v3 to 5V Converter
• 1 x 4 pin RMC Connector with Cable

XBee Explorer Regulated with 3v3 to 5V Converter Resources:

• X-CTU Software

• • Q

  • Does Xbee explorer board supports XBee S2C Pro?

    asked by Manas on April 29, 2017
• • A

  • This XBee Explorer Regulated with 3v3 to 5V Converter works with all XBee modules including the Series 1 and Series 2.5, standard and Pro versions.

• • Q

  • Can XBee Explorer Regulated with 3v3 to 5V Converter board be used to program the Xbee?

    asked by Sachin Chimmalgi on June 21, 2017
• • A

  • The XBee Explorer Regulated with 3v3 to 5V Converter module translates the 5V signals to 3.3V and vice versa, so that you can interface a 5V Micro controller to any XBee module. We can also program Xbee module using the XBee Explorer Regulated with 3v3 to 5V Converter with the help of interfacing module such as FTDI or CP2102.